Description: Filament Fiberlogy Refill Easy PLA 1,75 mm 0,85kg - Gray
Easy PLA filament to be placed on a reusable spool. ThePLAfilters will work well both in the hands of abeginner anda person with experience in working with3Dprinters. This type of material allows to print precise and more complex compositions. PLA is a relatively easy to print material, prints made of this material are characterized bygood durability. The cartridge can work with any3Dprinterworkingin FFF/FDM technology, which hasnotbeen equipped with additional protection against the use of third-party cartridges. The product is vacuum packed in order to ensure the highest quality of the product.
In our offer of filaments you will also find other materials and colors.
Refill Filaments
The Refill'spillarsare not on the factory reel. This allows the use ofreusablereels, such reels can be printed by ourselves using our own design or those available on the web. The manufacturer recommends using the reel according tothe RichRap user design. This solution allows us to significantlyreducethe amount of plastic waste generated by people involved in3Dprinting.
The grey Easy PLA pillar without reel.
What is the characteristic feature of PLA ?
PLA is a relativelyeasy toprint material, which makes it a perfect filamentforthe beginner. Moreover, the prints made with this pillar have a low material shrinkage, what is more, the smell appearing during printingis not as invasiveas in the case of other materials. Additionally, items made of this material are characterized by good strength and water resistance.PLAis a fully biodegradable material.
Suggested printing parameters of the filament
| Printing temperature | From 200°C to 230°C |
| Table temperature | From 50°C to 70°C |
| Cooling the printout | Recommended |
| Due to design differences between printers, the above data should be treated as a guide and the corresponding values should be determined experimentally. |
Technical specifications and physical properties of the pillar
| Parameter | Scope |
|---|---|
| Diameter of pillar | 1.75 mm |
| Dimensional tolerances of the philanthropy | +/- 0,02 mm |
| Colour | Grey |
| Printing temperature | From 200°C to 230°C |
| Table temperature | From 50°C to 70°C |
| Material | Easy PLA |
| Moisture absorber | Yes |
| Vacuum packing | Yes |
| Roundness | +/- 0.01 mm |
| Packaging dimensions | 205 x 205 x 90 mm |
| Net weight | 0.85 kg |
Properties of the Easy PLA pillar.
Useful links |
