Description: Filament Fiberlogy Refill Easy PLA 1,75 mm 0,85 kg - Orange
Orange filament made ofEasy PLAmaterial. It was vacuum-packed without a spool. It is designed for 3D printers working inFFF/FDMtechnology. The cartridge is water-resistant, biodegradable. The diameter ofthe filamentis1.75 mmand the material weight is850 g.
In our offer of filaments you will also find other materials and colors.
Refill ecological pillars
The advantage of the Refill is the lower price and the absence of disposable spools, which are thrown away after each use of the material. The Refill Easy PLA cartridge is designed to be used with the Masterspool reusable reel, which can be printed out by itself according toRichPap's design.This solution makes us care about the environment.
Filament Fiberlogy Refill Easy PLA Orange.
Properties of the Easy PLA Fiberlogy
- Strong
- It is not flammable
- Highly warp-resistant material
- It gives off a low intensity odour
- Biodegradable
- Waterproof
- It has a low material shrinkage
Suggested print parameters for filament
| Printing temperature | From 200°C to 230°C |
| Table temperature | From 50°C to 70°C |
| Cooling the printout | Recommended |
| Due to design differences between printers, the above data should be treated as a guide and the corresponding values should be determined experimentally. |
Easy PLA Fiberlogy specifications
| Parameter | Scope |
|---|---|
| Diameter of pillar | 1.75 mm |
| Dimensional tolerances of the philanthropy | +/- 0,02 mm |
| Colour | Orange |
| Printing temperature | From 200°C to 230°C |
| Table temperature | From 50°C to 70°C |
| Moisture absorber | Yes |
| Vacuum packing | Yes |
| Roundness | +/- 0.01 mm |
| Material | PLA |
| Net weight | 0.85 kg |
Easy PLA properties graph.
Useful links |
