Description: Filament Fiberlogy Easy PLA 1,75 mm 2,5 kg - Graphite
The EasyPLAgraphitecolour filter is designed for3D printers. The product with a net weight of2.5 kgis wound on a 300 mm diameter spool. The film was vacuum-packed together with a moisture absorber. Recommended printing temperature is between 200°C and 230°C. The diameter of the filament is1.75 mm. The Easy PLA filter can be used e.g. for printing various types of prototypes, toys, individual elements of toys, jewellery, decorations, etc. The material is made of renewable raw materials, thanks to which it is biodegradable.
Filament Fiberlogy Easy PLA 1.75 mm 2.5 kg - Graphite.
In our offer of filaments you will also find other materials and colors.
Properties of the filament
- Very good merging of layers during 3D printouts
- Biodegradable material
- Waterproof
- Does not give off an intense smell
- Table heating is not required
- Durability and high warpage resistance
Suggested print parameters for filament
| Printing temperature | From 200°C to 230°C |
| Table temperature | From 50°C to 70°C |
| Cooling the printout | Recommended |
|
Due to design differences between printers, the above data should be treated as a guide and the corresponding values should be determined experimentally. |
Technical specifications and physical properties of the filament
| Parameter | Scope |
|---|---|
| Diameter of pillar | 1.75 mm |
| Dimensional tolerances of the philanthropy | +/- 0,02 mm |
| Colour | Graphite |
| Printing temperature | From 200°C to 230°C |
| Table temperature | From 50°C to 70°C |
| Material | Easy PLA |
| Reel diameter | 300 mm |
| Reel width | 93 mm |
| Mounting hole diameter | 54 mm |
| Moisture absorber | Yes |
| Vacuum packing | Yes |
| Roundness | +/- 0.01 mm |
| Net weight | 2.5 kg |
