Product description: Devil Design Silk filament 1.75 mm 1 kg - Super Green
Filament Silk by Devil Design Silk is a thermoplastic material in filament form. It is used for FFF 3D printing . The filament is factory-wound on a spool and vacuum-packed with a moisture absorber. The spool contains 1 kg of light green product. The filament diameter is 1.75 mm. It can be used in all FFF printers that are not protected against the use of filaments from third-party suppliers. Silk is a blend of PLA and PETG, characterized by a very high gloss.
Our range of filaments also includes other materials and colors.
Devil Design Silk filament 1.75 mm 1 kg - Super Green.
Suggested filament printing parameters
| Printing temperature | From 230°C to 240°C |
| Table temperature | From 90°C to 100°C |
| Print cooling | Optional |
Noticeable swelling of the material exiting the nozzle while loading or printing with the filament is possible. However, this is a completely natural effect resulting from the surface tension of the polymers in the filament material. For better results, the manufacturer recommends setting a high airflow during printing and reducing the print speed.
| Due to differences in printer design, the above data should be treated as guidelines and the appropriate values should be determined experimentally. |
Technical specifications and physical properties of the filament
| Parameter | Range |
|---|---|
| Filament diameter | 1.75 mm |
| Filament dimensional tolerance | +/- 0.05 mm |
| Color | Light green |
| Material surface | High gloss |
| Material shrinkage | Very low |
| Printing temperature | From 230°C to 240°C |
| Table temperature | From 90°C to 100°C |
| Material | Silk |
| Spool diameter | 200 mm |
| Spool width | 70 mm |
| Mounting hole diameter | 52 mm |
| Moisture absorber | Yes |
| Vacuum packaging | Yes |
| Roundness | +/- 0.02 mm |
| Package dimensions | 205 x 205 x 80 mm |
| Net weight | 1 kg |
Useful links |
