Product description: Filament Devil Design Silk 1.75 mm 1 kg - Silver
Silk filament by Devil Design in silver . It can be used in all FFF / FDM printers that are not protected against the use of filaments from third-party suppliers. The Silk material is more precisely a mix of PLA and PETG materials. The resulting printouts are characterized by a high-gloss surface. In addition, the material is easy to print and does not emit an unpleasant odor. One spool contains 1 kg of filament with a diameter of 1.75 mm .
Filament Devil Design Silk 1.75 mm 1 kg - Silver.
During the loading of the filament or during printing, it is possible to notice the swelling of the material coming out of the nozzle. This is a completely natural effect, caused by the surface tension of the polymers that make up the filament material. For better results, it is recommended to set high airflow during printing and lower the printing speed.
Suggested filament printing parameters
| head temperature | From 225°C to 245°C |
| table temperature | From 50°C to 60°C |
| Print cooling | Optional |
Due to the differences in the construction of printers, the above data should be treated as guidelines, and the appropriate values should be determined experimentally.
Technical specification and properties of the Devil Design Silk filament
| PARAMETER | RANGE |
|---|---|
| Filament diameter | 1.75mm |
| Filament dimensional tolerance | +/- 0.05mm |
| Color | Silver |
| printing temperature | From 225°C to 245°C |
| table temperature | From 50°C to 60°C |
| Spool - material | silk |
| Desiccant | Yes |
| Vacuum packing | Yes |
| net weight | 1 kg |
