- EOL
|
Attention! The product has been discontinued. Check others products incategory. |
Description
The Cytron module compatible with Arduino, thanks to its narrow housing, it can be attached directly to the breadboard. The board contains an ATmega328 microcontroller, is equipped with 14 digital I/o, 6 of which can be used as PWM outputs (e.g. for motor control), and 6 as analog inputs. The system works with a clock signal on a frequency of 16MHz. The module also features: connector and DC powersocket, RESET button, leads to connect the AVR programmerand the UART connector for programming the board using the FTDI FT232RL converter. On the board are leads for direct attachment of the LCD2 x 8-pin display.
Power
The module can be powered via USB-UART converter, an external device, such as AC adapter. The power supply is connected to a standard DC slot.
Programming
Creating and installing software is allowed by the free environment of the Arduino IDE. Implemented bootloader allows you to send the program through the UART converter.
Specification
- Supply voltage: 7 V to 12 V
- Working voltage: 5 V
- Programmed via UART
- Microcontroller: ATmega328
- Maximum clock frequency: 16 MHz
- SRAM: 2 KB
- Flash memory: 32 KB (5kB reserved for bootloader)
- EEPROM: 1 KB
- I/O Ports: 14
- PWM outputs: 6
- Number of analog inputs: 6 (channels of A/C converter)
- Serial interfaces: UART, SPI, I2C
- External interrupts
- Soldered ISP connector
- Power connector: DC 5.5 x 2.1 mm
- Board sizes: 39 x 20 mm
Useful links
|
