- EOL
|
Attention! The product has been discontinued. Check other products in category. |
Product Description: iNode Serial USB Transceiver
iNode Serial Transceiver USB is designed like a flash drive, it is aLow Energy Bluetoothadapter module with a built-in USB 2.0 connector. It is powered by a5VUSB port. It has been designed for ease of use in any operating system: Windows, Linux, Android, etc. The product is compatible withRaspberry Pi. It is used in communication withBLE devices. iNode Serial Transceiver USB after establishing connection with BLE enables bidirectional transfer of BLE and RS232 data. Product dimensions are 52 x 18 x 9 mm.
iNode Serial Transceiver USB - Low Energy Bluetooth adapter module.
One option is to use iNode for your own programs to easily communicate with BLEs, as it is seen as a serial port on the PC. Control is done from the basic set ofHCIcommands sent as HEX-coded strings. To start scanning just send010C20020100string to the module. The same communication method is used in iNode LAN via TCP/IP or WebSocket or iNode Serial Transceiver UART via COM port.
Bluetooth parameters:
- Configurable from PC:
- The power with which the device works: up to +2.5 dBm maximum
- Name of the device
- Password to access the device
- Password-independent, password for authorising smartphone or PC applications (protects against copying and use by another client)
- UART parameters
iNode Serial Transceiver USB specification
- Power supply: 5 V DC
- Power consumption: 6 mA (during the scan) or 5 mA (in the broadcast state)
- Casing: plastic
- Signalling by means of LEDs:
- Operation in broadcast mode
- Connections
- Compatible with Raspberry Pi
- Possibility of remote software exchange:
- Alternative firmware: iNode Control Point USB
- USB 2.0 connection
- One control button
- Chipset: DA14531
- Operating temperature: -20°C to 45°C
- Humidity: 20% to 80% RHG
- Software:
- Python
- Dimensions: 52 x 18 x 9 mm
- Weight: 5 g
Useful links |
