- EOL
Attention! The product has been discontinued. Check other products in category. |
Product description: RSD - RS232 + Ethernet data logger - GS-software
RSD is a device that allows you to record datafrom the RS232 port and saveitto a USB stick or to a computer via RS232 or Ethernet. Correct data recording is indicated by adiodeor a digitaloutput for a specified time in the configuration. The result can be displayed in the software included with the device.
Data logger RS232 + Ethernet - GS-software.
Main features of the data logger
- Recording of incoming data on RS232 port
- Save the data frame after activating the input port in the RSD, e.g. after pressing the external button
- Save the data frame every specified interval
- Possibility to send frames to the RS232 port every specified time interval or after activating the input port
- Possibility of controlling the diode and digital output (relay)
Reading RS232 data.
Data logger operating modes
- Writing of all incoming data to the RS232 port- e.g. saving data after pressing the PRINT button on the load cell or saving data sent by the load cell during a defined time interval.
- Activation of a digital input followed by recording of one frame -data on the RS232 port should come cyclically but will only be recorded after activation of the digital input in the RSD. After the digital input is in high state, the recorder will save the first received frame, which will meet the conditions set in the configuration and go on to wait for the next input activation. E.g. load cell connected to external LED display, RSD device connected to RS232 line. Recording is done by pressing the external button.
- Sending queries by the RSD device- the device can send frames with the query defined in the configuration at a specific time interval. The received frame will be saved in the recorder's memory.
- Monitoring of vehicle scale passages - RSDrecords information about appearance of weight on the scale whose value is greater than defined in the configuration. Recorder records maximum, stable value of weight or maximum unstable value in case when there was no stable value from entry to exit from the scale. The recorder is also able to control the relay for a certain amount of time after the weight exceeding the set threshold has appeared.
RSD recorder software
The set with the recorder comes with computer software. It enables the configuration of the recorder and reading, exporting and presenting the data recorded by the device. The software has been equipped with a graphical editor, with the help of which the user can pleasantly determine where the frames of data he is interested in are located.
Using the software it is possible:
- reading of the recorded data (previously ripped to a USB key)
- transfer of the recorded data (previously ripped to a USB key)
- analysing the data stored in the RSD device memory
- extraction of data from transmission frames recorded in RSD memory
- exporting data to csv, txt file
- efficient configuration of the device
Software included in the RSD recorder.
RSD recorder specification
Technical Specification | |
---|---|
USB | |
Compatibility | USB 1.0 / 1.1 |
Compatibility | USB 2.0 / 3.0 |
Connector | USB Type A - socket |
File format | FAT32 |
Digital inputs/outputs | |
Number of digital inputs | 1 |
Type of digital input | Voltage free |
Number of digital outputs | 2 |
Communication interface to the device | |
Type of interface | RS232 (RX, TX, GND lines only) TTL operation possible |
Type of connector | Screw terminal |
Transmission speed | From 1200 bps to 115200 bps |
Alloy bit | 1,2 |
Communication interface to PC | |
Type of interface | RS232 (RX, TX, GND lines only) |
Type of interface | Ethernet |
Characteristics | |
Power supply | 12 V to 24 V DC (max, 300 mA) |
Memory Capacity | 16 GB |
Minimum time between stored frames | 50 ms |
Mass | 40 g |
Material | Anodized aluminium |
Degree of protection | IP40 |
Operating temperature | From -20°C to 50°C |
Dimensions (in housing) | 86 x 57 x 26 mm |
Useful links |