RS485 Shield v3 for Raspberry Pi 2/B/B+
RS485 Shield v3 for Raspberry Pi 2/B/B+
RS485 Shield v3 for Raspberry Pi 2/B/B+
RS485 Shield v3 for Raspberry Pi 2/B/B+
RS485 Shield v3 for Raspberry Pi 2/B/B+ - zdjęcie 1
RS485 Shield v3 for Raspberry Pi 2/B/B+ - zdjęcie 2
RS485 Shield v3 for Raspberry Pi 2/B/B+ - zdjęcie 3
RS485 Shield v3 for Raspberry Pi 2/B/B+ - zdjęcie 4

RS485 Shield v3 to Raspberry Pi 3/2 / B +

Index: SPF-05909
BOTLAND B. DERKACZ SPÓŁKA JAWNA Opinie z ekomi-pl.com

Overlay matched to GPIO Raspberry Pi 3B, 2B, 1B and 1B+ connectors, which allows for data transfer via RS485 protocol, which allows for the connection of up to 32 devices on the same line of up to 1 km in length with a maximum speed of 10 Mb/s.

€16.65
€13.54 tax excl.
Unavailable
Discontinued product
30-day returns
PayPal payment
Compatibility: Raspberry Pi

Attention!

The sale of the product has been completed. Check otherdevices in this category.

Description

Overlay toRaspberry Pifor data transfer via RS485 protocol. Although RS485 is an archaic bus, it has some features that distinguish it from newer interfaces. It allows, among other things, to connect up to 32 devices on the same line up to 1 km long with a maximum speed of 10 Mbps. The board has ARK screw connector for connecting transmission line wires and holes for DB9 connector solder.

The module is based on MAX481CSA chip(documentation). Details concerning connection and use of the overlay can be found on theproductpage.

Raspberry Pi 2 and B+

The module can also be connected to the RaspberryPi 3, 2 and B+leaving additional GPIO connectors free.

Converter - chip MAX481
Converter - Interface RS485

Same-day shipping

  • Crediting the payment for the order on our account on a business day before 10:00 AM means sending the goods on the same day.
  • All packages are being delivered by GLS Group courier and covered with insurance up to 1200 EUR.
  • You will receive a link to track your package and monitor the progress of delivery as soon as it is shipped.

Terms of delivery 

GLS - zone 1

Austria, Belgium, Croatia, The Czech Republic, Denmark, Germany, Netherlands, Poland, Slovakia 

  • Delivery time: 2-4 days
  • Delivery cost: from 4.18 EUR
  • Insurance: 1200 EUR
GLS - zone 2

Bulgaria, Estonia, France, Hungary, Italy, Latvia, Lithuania, Luxembourg, Portugal, Romania, San Marino, Slovenia

  • Delivery time: 2-5 days
  • Delivery cost: from 5.35 EUR
  • Insurance: 1200 EUR
GLS - zone 3

Finland, Greece, Ireland, Lichtenstein, Spain, Sweden 

  • Delivery time: 2-7 days
  • Delivery cost: from 7.67 EUR
  • Insurance: 1200 EUR

Payment methods

Card image cap
PayPal
  • Botland is a PayPal verified seller. Protect your financial information with this fast, safe and secure online payment system.

Card image cap
PayU
  • Choose easy and quick PayU e-payment method. Your financial information will stay secure.

Customers who bought this product also bought:

Set of Raspberry Pi 3B + 32GB microSD + accessories

The kit includes the Raspberry Pi model B in version 3 with a 2.5 A power supply and one of the most practical and popular enclosures - RS Pro with flap and heat sinks. A 32 GB...
Index: RPI-05655
Index: RPI-05655
Available, 24h shipping!
(Check quantity)
Regular price €65.03 Price €65.03

UART converter - RS485 5V - ARK/RJ11 - Waveshare 4738

Converter allows you to connect the microcontroller via the RS-485 bus which supports up to 32 devices on a line with length up to 1 km and a speed up to 10 Mbps. The module...
Index: WSR-04493
Index: WSR-04493
In stock, shipping 24 hours!
(Check quantity)
Regular price €2.90 Price €2.90

LCD display 2x16 blue characters

Symbol: JHD162A B-W. Driver compatible with HD44780 . Blue negative. Backlight: white LEDs. Character color: white.
Index: LCD-00224
Index: LCD-00224
In stock, shipping 24 hours!
(Check quantity)
Regular price €3.13 Price €3.13

Ethernet network module ENC28J60

A module that enables connection of the microcontrollers and development kits  including the Arduino with the Ethernet network via the SPI interface.
Index: MOD-01471
Index: MOD-01471
In stock, shipping 24 hours!
(Check quantity)
Regular price €6.73 Price €6.73

Converter RS232 - UART with connector DB9 - MAX3232 3,3V/5V

RS232 to UART serial interface converter with 9-pin D-SUB connector . The implementing circuit is the popular MAX3232.
Index: MOD-02030
Index: MOD-02030
Available, 24h shipping!
(Check quantity)
Regular price €3.58 Price €3.58

Relay 2 channel module with optoisolation - 10A/250VAC contacts - 5V coil

The module has two relays SRD-05 with a coil powered with a voltage of 5 V with optical isolation of input and mounting holes. The system allows you to control the actuators...
Index: MOD-02170
Index: MOD-02170
In stock, shipping 24 hours!
(Check quantity)
Regular price €2.00 Price €2.00

Logic level bi-directional converter, 4-channel - SparkFun BOB-12009

The module allows to exchange data between systems that use the most popular voltages levels: 5 V and 3.3 V and 1.8 V and 2.8 V. Works in both directions simultaneously. It has...
Index: SPF-02259
Index: SPF-02259
In stock, shipping 24 hours!
(Check quantity)
Regular price €2.42 Price €2.42

Bluetooth module HC-05

Module Bluetooth v2.0 + EDR, class 2. It works with a voltage of 3.3 V and communicates over a serial UART interface (RX, TX), supports the AT command. Maximum transmitter...
Index: MOD-02570
Index: MOD-02570
In stock, shipping 24 hours!
(Check quantity)
Regular price €9.61 Price €9.61

Relay module 4 channels with optoisolation - 10A/250VAC contacts - 5V coil

The module is equipped with four relays JQC-3F with a coil powered with a voltage of 5 V with optical isolation of input and mounting holes. The system allows you to control...
Index: MOD-02579
Index: MOD-02579
In stock, shipping 24 hours!
(Check quantity)
Regular price €3.13 Price €3.13

MicroSD card reader module - Pololu 2597

Reader module of the microSD cards from the Pololu with goldpin connectors - 2.54 mm pitch for self-soldering. It communicates with main board via SPI interface, it operates...
Index: PLL-02696
Index: PLL-02696
In stock, shipping 24 hours!
(Check quantity)
Regular price €3.13 Price €3.13

MicroSD card reader module with buffer and stabilizer - MOD-13

Micro SD card reader module with goldpin connectors - 2.54 mm raster for self soldering. It communicates with the motherboard through the SPI interface, has a built-in buffer...
Index: MOD-02830
Index: MOD-02830
Unavailable
Regular price €6.05 Price €6.05

16 x tact switch keyboard

The matrix consists of 16 tact switch buttons spread out in four rows and four columns. Signals are output on 8 popular goldpin connectors - 2.54 mm raster.
Index: MOD-02895
Index: MOD-02895
Available, 24h shipping!
(Check quantity)
Regular price €0.99 Price €0.99

Products from the same category

DC Motor - Tamiya 980112M Mabuchi FA-130

Small metal motor reaching 12,300 rpm with a supply voltage of 3 V.
Index: PLL-00138
Index: PLL-00138
Unavailable
Regular price €1.91 Price €1.91

L297 - stepper motor driver

Two-channel, full H-bridge. Using the system we can control the power stage, change the revolutions and regulate the current flowing through the motor winding. Supply...
Index: UCC-00938
Index: UCC-00938
Unavailable
Regular price €8.98 Price €8.98

Q-touch AT42QT1085-AU - SMD

Chip that can handle up to eight touch buttons in the case surface soldered (SMD).
Index: UCC-01078
Index: UCC-01078
Unavailable
Regular price €2.23 Price €2.23

Photosensitive laminate single-side 15x30cm

Glass-and-Epoxy photosensitive laminate. Plate measuring 15 x 30 cm with a layer of copper and a photosensitive coating applied to it. Enables independent making of...
Index: LUT-02144
Index: LUT-02144
Unavailable
Regular price €9.20 Price €9.20

STM32L100C-Disco - Discovery - STM32L100CDISCOVERY

Development set with STM32L100RCT6 microcontroller with Cortex M3 supplied with 256KB Flash memory, 16 KB of RAM. It allows you to get acquainted with the series of...
Index: DIS-02545
Index: DIS-02545
Unavailable
Regular price €10.55 Price €10.55

Case for Raspberry Pi 3B+/3B/2B and module PiFace Digital 2 - transparent

The transparent enclosure accommodates not only the Raspberry Pi mini-computer in 3B+, 3B, 2B and 1B+ versions, but also the dedicated PiFace Digital module.
Index: RPI-02930
Index: RPI-02930
Unavailable
Regular price €10.58 Price €10.58

Case for Raspberry Pi 3 model A + black

Black case for Raspberry Pi minicomputer in version A+ with external dimensions 72 x 68 x 32 mm .
Index: RPI-02969
Index: RPI-02969
Unavailable
Regular price €4.93 Price €4.93

Tachometer UNI-T UT371

The device allows to measure the rotational speed in the range from 10 to 99 999 rpm, with an average accuracy up to 0.04 % +/- 2 dgt. The meter can be used, for example, to...
Index: UPM-03234
Index: UPM-03234
Waiting time approx. 10-30 days
Regular price €49.28 Price €49.28

Rotary Switch 2-positions

Rotary switch, 2-state for the case, equipped with 3 contacts. The pitch is 5 mm. The total height is 37 mm.
Index: UCC-03350
Index: UCC-03350
Unavailable
Regular price €2.81 Price €2.81

Blow Silver RCA cable - RCA 1m

Bi-directional cable, used for digital and analog connections. It conveys the vision and sound in all hardware of audio and video, such as speakers or home theater system. The...
Index: KAB-03397
Index: KAB-03397
Unavailable
Regular price €2.90 Price €2.90

MicroUSB B - A cable Blow - black 1.5m

Black cable USB (type A) - microUSB (B type) used to connect computer with devices equipped with a microUSB-B, it allows for data transfer and charging. Length: 1.5 m
Index: ADR-04084
Index: ADR-04084
Unavailable
Regular price €1.49 Price €1.49

Universal board round PA07 - 120mm

Universal round board enables creating your own extensions, modules, etc.
Index: PLY-04158
Index: PLY-04158
Unavailable
Regular price €14.99 Price €14.99