





Easy-to-use, mains-side LiPo chargerSkyRC E4 with a balancer. It is powered by 230V mains voltage. It is used to charge 1-4 targeted Lithium-Polymer (LiPol) and Lithium-Phosphate (LiFe) packages.
Attention! The sale of the product has been completed. Check other devices in this category. |
Simple chargerSkyRC E4 with balancer. 230 V, 50 Hz mains voltage, so no additional power supply is required. Compatible with lithium-polymer batteries from 1S to 4S (3.7 V to 14.8 V). The batteries are connected via a balancer connector. The charger has a maximum power of 20 W and the ability to select the charging current according to the capacity of the package.
Posting the payment for the order on our account on a business day up to 10 AM means sending the goods on the same day!
The time of payment depends on the ELIXIR's hours session of the sender's bank and the recipient of the transfer. It may take up to 2-4 working days.
Only for prepaid orders shipped to Poland.
Austria, Belgium, Croatia, The Czech Republic, Denmark, Germany, Netherlands, Slovakia
Bulgaria, Estonia, France, Hungary, Italy, Latvia, Lithuania, Luxembourg, Portugal, Romania, Slovenia
Finland, Greece, Ireland, Sweden, Cyprus, Malta, Spain
No customer reviews for the moment.
Customers who bought this product also bought:
Li-Pol Dualsky 800mAh 25C 2S 7,4V ECO-S package
A powerful Dualsky lithium-polymer battery. Discharge current: continuous 25 C (20 A). Dimensions 66 x 26 x 13.5 mm. Weight: 43 g.Adhesive velcro 50x30 mm 5 packs
Five 50 x 30 mm self-adhesive Velcro fasteners suitable for mounting batteries, receivers, regulators etc. in robots or RC models.I2C converter for HD44780 LCD display
The I2C converter for the popular display with controller HD44780 for example, 2x16 characters. Thanks to this system, two data lines and supply 5 Volts and...ATmega328 mini module - microBOARD-M328
Module microBOARD-M328 is a mini development set with microcontroller ATmega328P used in popular Arduino Uno modules.Power supply 9V/2A - angle DC plug 5,5/2,5mm
Power supply unit. Supply voltage: 100 V to 230 V. Output voltage: 9 V DC. Output current: up to 2 A. Angular connector: 5.5 / 2.5 mm.Ceramic condenser 100nF / 50V THT - 10 pcs.
Through hole ceramic capacitor of 100 NF / 50 V. The price for 10 pieces.Power wires with JST - BEC socket
Double silicone cable completed with a slotof type "BEC", it is used to connect power from the rechargeable batterries and batteries.LiPoly micro charger - Li-Pol 1S 3,7V microUSB charger
Charger of 1-purpose lithium-polymer batteries with a nominal voltage of 3.7 V, powered via a microUSB connector. Includes goldpin connectors and a screw socket for...Products from the same category
DC Motor - Tamiya 980112M Mabuchi FA-130
Small metal motor reaching 12,300 rpm with a supply voltage of 3 V.Micro-Match connector for 10-pin tape
Micro-Match connector on 10-vein tape with a pitch of 1.27 mm.Pololu LPY550AL 2-axis XZ gyroscope
A sensor for measuring angular speed in two axes: XZ. It has a choice of measuring range: to ±500 °/sec, ±2000 °/sec. It has an integrated voltage regulator and analogue...3-axis magnetometer, digital MAG3110
3-axis magnetometer in a small case DFN. Measuring range: ±1000 uT. Sensitivity at 0.1 uT. The communication interface is I2C bus.HiTechnic color sensor - for Lego Mindstorms EV3 and NXT
The sensor together with the sensor and the intensity is vision Lego NXT robot. The sensor is able to distinguish between all colors including the colors of the blocks.Servomechanism - Lego Mindstorms NXT
The servo can serve as the actuator of the robot. The device allows precise movement accurate to 1 degree.USB Bluetooth adapter - Lego Mindstorms NXT
Adapter USB-Bluetooth allows the wireless exchange of data between computers, PC or Mac and the NXT device.Receiver module GPS-FGPMMOPA6H GPS
Receiver module based on MT3339 chip in the surface soldered case - SMD. It has a built-in antenna and the possibility to connect the external version.