- New
Product description: Complete hotend head for Bambu Lab X1 series printers - 0.2 mm
Complete hotend head from Bambu Lab , compatible with X1 series printers. Equipped with a hardened steel nozzle with a diameter of 0.2 mm , it guarantees an accurate printing process. The set includes a fan, a thermistor and a ceramic heater . Installing the head in the printer is very simple, it only requires an Allen key. By integrating the heat sink, throat, heater block and nozzle into one coherent unit, Bambu Lab hotends can be assembled without prior warm-up . This eliminates the typical problems of filament leakage between the nozzle and the thermal break interface that often occurs in other 3D printers.
Complete hotend head for Bambu Lab X1 series printers - 0.2 mm. Equipped with a hardened steel nozzle with a diameter of 0.2 mm, it guarantees an accurate printing process.
Special features
- Compatibility with the X1 series - specially designed to work with the X1 series printers from Bambu Lab, thus guaranteeing full compatibility and optimal operation
- Hardened steel nozzle with a diameter of 0.2 mm - enables a very accurate printing process
- High-quality materials - the hotend is made of high-quality materials, which not only guarantees durability, but also extends the life of the entire component
- Versatility in printing with various filaments - the head works with various types of filaments, which makes it a versatile 3D printing tool
Our offer includes a wide selection of accessories for 3D printers - check it out!
Compatibility of filaments with nozzles
| Nozzle 0.2 mm | Nozzle 0.4 mm | Nozzle 0.6 mm | Nozzle 0.8 mm | hardened steel | |
|---|---|---|---|---|---|
| PLA | |||||
| PLA shiny | |||||
| PLA marble | |||||
| PETG | |||||
| PVA | |||||
| ABS | |||||
| ASA | |||||
| P.C | |||||
| PA | |||||
| TPU | |||||
| Bambu PLA-CF | |||||
| Bambu PETG-CF | |||||
| Bambu PAHT-CF | |||||
| Bambu PET-CF | |||||
| CF/GF filaments from other manufacturers |
Technical Specifications
- Producer: Bambu Lab
- Compatibility: Bambu Lab X1 series printers
- Type of spare part: heating head - hotend
- Nozzle diameter: 0.2 mm
- Nozzle material: hardened steel
- Maximum printing temperature: 300°C
- Hotend length: 47.3 mm
Set contents
- Complete hotend head for X1 series printers
- 2x M3-14 step screws
The set includes a fan, thermistor and ceramic heater.
