Description
Board with BluetoothBLE module and USB A plug, which allows you to capture the transmitted packets of BLE. A device is designed for debugging the projects based on the data transmission in the Bluetooth BLE standard.
To run the module, simply connect the device to the computer, attach the so-called Sniffer Bridge (SW), select a device that will be monitored and start the WireShark or Nordic nRFSniffer which will start the capturing of packets in the real time.
| Check the product details in the user manual! |
Specification
- The possibility to connect to the computer via USB, data is transmitted via emulated COM port
- Driver: Bluetooth Nordic nRF51822 system
- USB to serial converter: CP2102N
- The module is compatible with Bluetooth 4.0 BLE
- It works with Android and iOS (app source code)
- Support for the GATT mode andthe AT commands
- It is equipped with 4 LEDs for monitoring: connection, read mode, and the RX TX pins
- It has the JTAG SWD connector for programming
- The dimensions of the board: 18 x 56 x 7 mm
|
Note This board can capture packets only in the standard Bluetooth Low Energy (BLE). Classic Bluetooth is not supported. |
Useful links |
