Description: Fiberlogy PCTG 1,75 mm 0,75 kg film - Red
PCTG filament in red color, is wound on a spool with a net weight of 0,75 kg. Material belongs to the same polyester family as PETG, but offers increased impact strength (about90 kJ/m2), temperature resistance and clarity. It does not require a heated chamber, which allows its use in home printers. It offers high dimensional stability and low shrinkage prevents model cracking. This makes it an easy material to use even for people without much experience in 3D printing. PCTG also withstands higher temperatures (up to 76°C) andis recyclable. The diameter of the filament is1.75 mm.
In our offer of filaments you will also find other materials and colors.
Properties of PCTG filament
Filament is characterized byhigh impact strength(up to 20 times higher than PETG), has a highchemical resistance. PCTG iseasy to 3D print, because it is dimensionally stable and has low shrinkage. It is also suitable for contact with food - no BPA(Pure Transparent version only).
Suggested parameters for printing with the filament
| Printing temperature | From 250°C to 270°C |
| Table temperature | From 90°C to 110°C |
| Closed chamber | Not required |
| Due to differences in printer design, the above data should be considered as a guideline and the appropriate values should be determined experimentally. |
Fiberlogy PCTG 1,75 mm 0,75 kg - Red.
Fiberlogy felt specification
| Parameter | Range |
|---|---|
| Filament diameter | 1,75 mm |
| Dimensional tolerance of the filament | +/- 0.02 mm |
| Colour | Red |
| Printing temperature | From 250°C to 270°C |
| Table temperature | From 90°C to 110°C |
| Material | PCTG |
| Printing speed | < 100 mm/sec. |
| Drying conditions | 60°C / 4 h |
| Mounting hole diameter | 52 mm |
| Moisture absorber | Yes |
| Vacuum packaging | Yes |
| Roundness | +/- 0,01 mm |
| Retraction speed | 10 to 30 mm/s |
| Net weight | 0,75 kg |
Properties graph of PCTG filament.
Useful links |
