BlueSMiRF v2 - Bluetooth wireless communication module - ESP32-PICO-MINI-02 - with connectors - SparkFun WRL-23287

Index: SPF-24585 EAN: 5904422385569
SparkFun BlueSMiRF v2 is a development board equipped with ESP32-PICO-MINI-02 . It supports wireless Bluetooth communication, any serial stream from 2400 bps to 921600 bps can be seamlessly transmitted between two devices. BlueSMiRF v2 also supports duplex transmissions up to 921600 bps, which allows for excellent buffering, transmission and delivery of the data stream while maintaining full byte compatibility.
BlueSMiRF v2 - Bluetooth wireless communication module - ESP32-PICO-MINI-02 - with connectors -...
€21.90
€17.80 tax excl.
Available
Shipping in 24 hours
PayPal payment
Manufacturer: SparkFun

Product description: BlueSMiRF v2 - Bluetooth wireless communication module - ESP32-PICO-MINI-02 - with connectors - SparkFun WRL-23287

SparkFun BlueSMiRF v2 is a development board equipped with ESP32-PICO-MINI-02 . It supports wireless Bluetooth communication , any serial stream from 2400 bps to 921600 bps can be seamlessly transmitted between two devices. BlueSMiRF v2 also supports duplex transmissions up to 921600 bps, allowing for excellent buffering, transmission and delivery of the data stream while maintaining full byte compatibility. The module has pre-assembled pins, making it simple and fast to use - it can be directly connected to boards such as Arduino Pro, Pro Mini, LilyPad Arduino 328 Main, ZED-F9P , ZED-F9R, UM980, SerLCD or any board with a standard 6-pin serial connector. It is ideal for short-range applications up to 33 m indoors that require easy setup of point-to-point communication, making it useful for prototyping and testing IoT applications based on wireless data transmission.

Also check out the user guide prepared by the manufacturer!

BlueSMiRF v2 - Bluetooth wireless communication module - ESP32-PICO-MINI-02 - with connectors - SparkFun WRL-23287.

SparkFun BlueSMiRF v2 is a development board equipped with the ESP32-PICO-MINI-02.

Special Features of BlueSMiRF v2

  • Equipped with Espressif ESP32-PICO-MINI-02 with built-in PCB antenna
  • Supports Bluetooth BLE wireless communication
  • Allows transmission speeds from 400 bps to 921600 bps
  • It is easy to compile with the most popular platforms - Arduino and high precision GNSS breakout modules or any board with a standard 6-pin serial connector
  • Dedicated to applications using short-range communication (up to 33 m)
  • Can be controlled from a phone or computer using a serial terminal application
  • Changing settings such as baud rate, flow control, and LED mode is easy to do with a simple set of AT commands
  • It has a built-in voltage regulator that allows power supply in the range of 3.3 V to 5 V

Technical specification of the board

  • Built-in chip: Espressif ESP32-PICO-MINI-02
  • Wireless communication: Bluetooth
    • Serial Port Profile (SPP)
    • Bluetooth Low Energy (BLE)
  • Over-the-air (OTA) firmware updates: via 2.4 GHz WiFi
  • Antenna: Built-in PCB
  • Voltage regulator: AP2112K 3.3V/600mA
  • Logic level converters: yes, on all pins
  • Recommended input voltage: 3.3V to 5V
  • Current and power consumption at 3.3 V
    • Idle: 72mA / 238mW
    • Non-serial connection: 75 mA / 248 mW
    • Serial communication in duplex mode: 140 mA / 462 mW
  • Operating status indication: two LEDs
  • Pins: 1x6 male pins, 2.54 mm pitch
  • Board dimensions: 44.2 x 15.22 mm
  • Weight: 3.4 g

The module dimensions allow for easy implementation in existing projects. The module dimensions allow for easy implementation in existing projects.

Package width 5 cm
Package height 9.5 cm
Package depth 0.5 cm
Package weight 0.004 kg

Be the first to ask a question about this product!

Customers who bought this product also bought:

Products from the same category: