• EOL

Twist - RGB rotary encoder (Qwiic) - SparkFun DEV-15083

Index: SPF-13625 EAN: 5904422341992

Module with potentiometer with built-in LED RGB which changes the colour during the rotation of the knob. One turn increases the whole number by 24 and by -24 in case of rotating in the counterclockwise direction. The module communicates via I2C interface, it has a built-in Qwiic connector to facilitate the connection.

Twist - RGB rotary encoder (Qwiic) - SparkFun DEV-15083
€23.90
€19.43 tax excl.
Unavailable
Discontinued product
PayPal payment
Manufacturer: SparkFun

Attention!

The product has been discontinued. Check other products in category.

Description

Module with potentiometer with built-inLED RGBwhich changes the colour during the rotation of the knob. One turn increases the whole number by 24 and by -24 in case of rotating in the counterclockwise direction. The module communicates viaI2Cinterface, it has a built-inQwiic connector to facilitate the connection.

LED mounted on the knob of the encoder, can emit more than 16 million of different colors. On the board is Qwiic connector that facilitates the connection and holes for soldering the goldpin connectors.The sensor operates with the voltage of 3.3 V, to connect it to the module operating at 5 V, it is necessary to applya voltage converter.

 

The product is compatible withArduino

The manufacturer provides auser manualandlibraryfor users ofArduino.

Connection

The module has five holes for goldpin connectors- 2.54 mm pitch (not included in the package, sold separately). All pins are appropriately signed on the board.

Pin Description
RST Reset.
GND The ground of the module.
VCC Supply voltage is 3.3 V.
SDA The data line of the I2C bus - it works with a voltage of 3.3 V.
SCL The clock line of the I2C bus - it works with a voltage of 3.3 V.
INT The external interrupt.

Specification

  • Supply voltage: 3.3 V
  • Communication: I2C
  • Current consumption:
    • when you turn off the diode: 2,8 mA
    • when the diode is on: 40,6 mA
  • 24 impulses per turn
  • Detection of revolutions in the clockwise and counterclockwise direction
  • Software I2C address configuration - up to 111 devices on one bus
  • Built-in temporary button
  • RGB LED controlled by PWM which can provide up to 16 million of colors
  • The I2C communication speed: 400 kHz
  • Jumpers for address selection, exceptions of the pulling-up of the interrupt, exceptions of the pulling-up of the I2C
  • I2C address: 0x3F (open jumper), 0x3E (closed jumper)
  • 2x connector Qwiic
  • Dimensions: 32 x 26 mm


Be the first to ask a question about this product!

Customers who bought this product also bought:

Products from the same category: