



A single Redox lithium-polymer cell. Discharge current: continuous 20C (36A), weight 41g, dimensions 83x29x8mm.
Single lithium-polymer cell Redox. Discharge current: continuous 20 C (36 A), weight 41 g, dimensions 83 x 29 x 8 mm.
NOTE! Before use, it is essential to read the following |
Length | 83 mm |
Width | 29 mm |
Height | 8 mm |
Mass | 41 g |
Voltage output from | 3.7 V |
Output voltage to | 4.2 V |
Nominal output voltage | 3.7 V |
Capacity mAh | 1800 mAh |
Cell - case | cell 1S |
Cell | 1 |
Cell - Type | Li-Pol |
Posting the payment for the order on our account on a business day up to 10 AM means sending the goods on the same day!
The time of payment depends on the ELIXIR's hours session of the sender's bank and the recipient of the transfer. It may take up to 2-4 working days.
Only for prepaid orders shipped to Poland.
Austria, Belgium, Croatia, The Czech Republic, Denmark, Germany, Netherlands, Slovakia
Bulgaria, Estonia, France, Hungary, Italy, Latvia, Lithuania, Luxembourg, Portugal, Romania, Slovenia
Finland, Greece, Ireland, Sweden, Cyprus, Malta, Spain
No customer reviews for the moment.
LiPo LCD voltage indicator 2-6 cells
Voltage indicator for Li-Po batteries (2-6 cells).Li-Pol charger with balancer REDOX Beta Combo + power supply
Loader/unloader with built-in cell balance. Supports LiPo, LiIon and LiFe, NiCd, NiMH and Pb cells and packages. It also comes with a power supply, allowing direct...Charger Li-Pol / Li-Fe / Li-Ion / Ni-CD / Ni-MH with balancer - Redox Alpha V2
Charger/discharger for packages: LiPo, LiFe, LiIon, NiCDi NiMH with built-in balancer of links Redox Alpha.MAX1811ESA + Li-ion battery charger
Charger module for individual cells of the battery Li-ion with the ability to power via USB.Bag for LiPo packages 200 x 180 mm (small)
Bag for safe storage of lithium-polymer packages with dimensions: 200 x 180 mm.Bag for LiPo packages 300 x 230 mm (large)
Bag for safe storage of lithium-polymer packages with dimensions: 300 x 230 mm.Charger Li-Pol R-Planes - Pioneer
Battery charger for 7.4 - 11.1 V LiPo packages supplied with 9 - 16 V DC.Customers who bought this product also bought:
AVR microcontroller - ATmega32A-PU - DIP
Popular microcontroller AVR from ATmel in a case DIP40.AVR microcontroller - ATmega8A-PU DIP
Microcontroller from Atmel AVR 28-leg DIP case. Voltage supply range from 2.7 V to 5.5 V, frequency up to 16 MHz, has 8 KB Flash, 1 KB RAM, 512 B of EEPROM.Ball Caster 1/2'' - plastic - Pololu 952
Lightweight plastic ball in the bowl with a diameter of 0.5 inches. It is ideal to use to support the front of the two-wheeled robot.Ball Caster 3/8'' - plastic - Pololu 950
Lightweight plastic ball in the bowl with a diameter of 3/8 inches, it is used to support the front of the two-wheeled robot.Magnetic Buzzer 3V 2.1mm SMT-0540-S-R SMD
Small sound generator SMT-0540-S-R power range 2 - 4 V. Dimensions: 5 x 5 x 2.1 mm. SMD case.Soldering tin in tube 16g / 1.00mm
Tin in a tube with a diameter of 1.00 mm and a weight of 16 grams.CNY70 reflective optocoupler sensor
Reflective optocoupler used, for example, to distinguish the edges or for line detection. Case dimensions - 7 x 7 x 6 mm,through hole installation.KTIR0711S reflective optocoupler sensor - 5pcs
Reflective optocoupler used, for example, to distinguish the edges. The system is closed in a small, surface soldered case with dimensions: 2.7 x 3.4 mm. Items are sold in...Brushless motor driver (BLDC) Dualsky 6A v2
12-volt and 6A capacity from Dualsky for motors brushless 3-phase motors.JST - BEC socket for Li-Pol batteries
BEC (JST) slot is mainly used for connections on the cables powering the rechargeable battery, for example, lithium-polymer.Products from the same category
Akyga Li-Pol 1350mAh 1S 3,7V battery - JST-BEC connector + socket - 59x37x5mm
3.7 V lithium-polymer battery of 1350 mAh capacity with JST connector. The weight is 26 g and the dimensions 59 x 37 x 5 mm. The cable terminated with JST socket and free...Li-Pol Akyga 980mAh 1S 3,7V battery - 4 wires - 2.54mm female connector - 50x34x6mm
Lithium-polymer 3.7V 980 mAh battery with 4-pin female connector, 2.54 mm raster. Weight is 20 g and dimensions 50 x 34 x 6 mm.Akyga Li-Pol cell 1400mAh 1S 3,7V - connector JST-BEC + socket - 54x34x7mm
Akyga lithium-polymer battery, 3.7V and 1400 mAh capacity. The battery's outputs are a connector and a 2.54 mm raster socket. It is widely used in many mobile devices and can...Akyga Li-Pol cell 1250mAh 1S 3,7V - connector JST-BEC + socket - 58x34x6mm
Akyga lithium-polymer battery, 3.7 V and 1250 mAh capacity. The battery's outputs are a connector and a 2.54 mm raster socket. The cable length is 150 mm. Weight is 25.5 g and...Akyga Li-Pol battery 1500mAh 1S 3,7V - JST-BEC connector + socket - 70x40x6mm
3.7 V lithium-polymer battery of 1500 mAh capacity with JST connector. Weight is 30 g and dimensions 70 x 40 x 6 mm. The cable terminated with a JST socket and free cables...Akyga Li-Pol cell 750mAh 1S 3,7V - JST-BEC connector + socket - 50x34x4,4mm
Akyga lithium-polymer battery, 3.7V and 750mAh capacity. The battery's outputs are a connector and a 2.54 mm raster socket. The cable length is 150 mm. It is widely used in...Akyga Li-Pol cell 560mAh 1S 3,7V - cables 100 mm - 40x30x5mm
Akyga brand battery made in Li-Pol technology with a nominal voltage of 3.7 V and a capacity of 650 mAh. High energy density, slow self-discharge, small dimensions and low...Akyga Li-Pol cell 1400mAh 1S 3.7V - connector JST-BEC + socket - 62x34x6mm
Akyga lithium-polymer battery, 3.7V and 1400 mAh capacity. The battery's outputs are a connector and a 2.54 mm raster socket. It is widely used in many mobile devices and can...Cellevia Li-Pol cell 850mAh 1S 3.7V - connector 2,54mm
3.7 V lithium-polymer battery of 850 mAh capacity with JST connector . Weight is 20 g and dimensions 48 x 30 x 6 mm.Li-Pol PiJuice 12000mAh 3,7V battery - 3 wires female connector
A 3.7V Lithium-Polymer PiJuice 3.7V battery with a capacity of 12000 mAh and a 3-pin female connector. Weight is 195 g and dimensions are 135 x 68 x 9 mm.Akyga Li-Pol cell 1000mAh 1S 3,7V - JST-BEC connector + socket - 40x30x8mm
Akyga Li-Pol type battery with a nominal voltage of 3.7 V and a capacity of 1000 mAh . It is characterized by high energy density and slow self-discharge. It has a...Cellevia Li-Pol cell 250mAh 1S 3.7V - connector 2,54mm
3.7V lithium-polymer battery of 250 mAh capacity with JST connector. Weight is 9 g and dimensions 30 x 17 x 6 mm.