- EOL
|
Attention! The product has been discontinued. Check other products in category. |
Description
Module WiPy 2.0 in OEM version enable communication to the wi-fi network and Bluetooth BLE on Linux, with the support for Python developers. There is a system ESP32 with 4 MB RAM and 8 MB Flash memory. 24 lines GPIO, interfaces 2x UART, 2 SPI, I2C, I2S, microSD, and 8 channels of 12-bit converter enable the connection of any sensors and the creation of the Internet of Things (IoT).
|
A detailed description of the module can be found on the website of the manufacturer and in technical specifications. Manufacturer provides a freesoftware Pymakr. |
Key features
- Working voltage: 3.3 V
- Microcontroller ESP32
- RAM: 4 MB
- Flash memory: 8 MB
- Integrated wi-fi 802.11 b/g/n, wireless range of up to 1 km
- Built-in IP stack v6
- Built-in Bluetooth BLE 4.2 and 2.0
- Real-time clock RTC 32 kHz
- Built-in DMA controller
- Lines GPIO: 24
- Network interfaces: 2 × UART, 2 SPI, I2C, I2S, microSD Card
- Built-in analog-to-digital converter, 8 channel with a resolution of 12 bits
- Counters four 16-bit PWM outputs
- Wi-fi security: SSL/ TLS, WPA
- Dimensions: 20 x 16 x 2.7 mm
First run
To start working with the module you need to download Pymak environment from the manufacturer's website, connect with WiPy and create your own program or use existing samples.
Differences between W01 and WiPy
The module W01 does not include to the following items:
- Voltage regulator
- Protection against reverse power connection
- Antenna switch
- Antenna SMD
- Connector.FL
- Reset button
- LED
- Pins
- Several passive elements
Useful links |
