- EOL
|
Attention! The product has been discontinued. Check other products in category. |
Description
Kit enables the creation of IoT projects based on the Particle Xenon board allowing for Wi-Fi, Mesh, and Bluetooth communication. Particle Argon with a microcontroller nRF52, supplied with a core - ARM Cortex M4F 64 MHz, 256 kB RAM, 1 MB Flash memory. Built-in module nRF52840 supports the Mesh network and Bluetooth and 20 GPIO pins, working voltage 3.3 V. There is an additional ESP32 systemenabling wi-fi communication. Programming is done via the cloud www.particle.io. The board can be powered via the microUSB port or with a lipo battery connector JST 2-pin raster 2.0 mm.
The contents of Particles Argon KIT.
|
The device works with the software in the cloudparticles.io. Detailed information about the programming and maintenance of wi-fi is available inthe user's guide. |
Communication
Thanks to the installed module nRF52840 the user can to communicate with the Mesh network and via Bluetooth in a simple way, additional coprocessor ESP32-D0WD allows you to communicate wi-fi 2.4 GHz. The system is compatible with the standard 802.15.4-2006 and Bluetooth 5. It also has a protection module and encryption. The kit includes an external wi-fi antenna.FL.
Programming
The device works with the software in the cloudparticles.io. Detailed information about programming and services is available inthe documentation.
|
Module's inputs work with voltage 3.3 V. |
Distribution of elements on the Argon Board.
Inputs
On the board there are interfaces such as UART, I2C, SPI. The board has soldered goldpin connectors with a raster of 2.54 mm, which allows you to connect it directly to the breaboard.
|
A detailed description of the inputs is in thedocumentationon the manufacturer's website. |
Specification
- Supply voltage VIN: 4.5 V to 5 V
- Voltage of a USB power: 5.0 V
- Lipol voltage: 3.7 V
- System nRF52840:
- Microcontroller: ARM Cortex M4F 32-bit
- Clock Frequency: 64 MHz
- RAM: 256 KB
- Flash memory: 1 MB
- Standard: IEEE 802.15.4-2006 / 250 kb/s
- Bluetooth 5: 2 Mbps, 1 Mbps, 500 kbps, 125 kb/s
- Supports DSP instructions
- Cryptographic module ARM TrustZone CryptoCell-310
- Transmitter power: up to +8 dBm
- NFC Tag-A
- System Espressif ESP32-D0WD:
-
- Flash memory: 4 MB
- Wi-Fi standard: 802.11 b/g/n
- 802.11 n: 2.4 GHz up to 150 Mbit/s
- Additional memory, SPI Flash: 4 MB
- Programmable via microUSB
- Interfaces: 20x GPIO:
- 6 x analog input
- 8 x PWM
- UART
- SPI
- I2C
- Built-in lipo battery charger: JST connector 2-pin, pitch 2.0 mm
- LED RGB
- Reset button and Mode
- Built-in PCB antenna and connectors.FL
- All output: 28
- Inputs Xenon working voltage 3.3 V
- Dimensions: 51 x 23 x 15
- Weight: 10 g
Set includes
- Module Argon Particle
- Breadboard
- Red LED
- Photodiode
- 2x resistor
- Antenna LTE.FL
- MicroUSB cable
Useful links |
