Description
Externalsound cardfor Raspberry Pi in a form of Hat shield, is compatible with models with 40-pin connectors of GPIO (4B/3B+/3/2/B+/A+) without soldering, it works directly from minicomputer. It allows you to process the digital signal into analog so such signal, through which the speaker can play the sound. The module hastwo channels for microphone (3.5 mm Jack) and output (RCA left/right). Settingscan be adjusted with jumpers. Included are 4 spacers, M2. 5 x 12 mm.
HiFiBerry DAC+ ADC withthe Raspberry Pi 3B.
Application
- Playing music on the Raspberry Pi
- Connecting devices such as: mobile phone, MP3 players, Amazon, Alexa, etc.
- Processing music with synthesizer
- Karaoke
Specification
- Output and stereo input
- Converter: Burr-Brown
- Sampling: from 44.1 kHz up to 192 kHz / 24-bit
- Hardware volume control
- Balancing the entrance
- Compatibility: Raspberry Pi 2 or later
- Powered directly from the RPI
- Connectors: RCA (gilded) and audio Jack 3.5 mm
- Maximum input voltage: 2.1 V rms (4.2 V rms for balanced input)
- Maximum output voltage max: 2.1 V rms
- The signal/noise ratio ADC: 110 dB
- The signal/noise ratio DAC: 112dB
- ADC THD+N: -93dB
- DAC THD+N: -93dB
- The sensitivity of the microphone signal (configurable with jumpers): 0 dB, 12 dB, 32 dB
- Power consumption: < 0.3 W
- Dimensions: 55 x 65 x 20 mm
- Weight: 20 g
Accessories
In our offer, you will finddedicated cases for HiFiBerry and Raspberry Pi.
Minicomputer Raspberry Pi with HiFiBerry in a dedicated case.
Useful links |