Description
1.54" e-paper display module with a resolution of 200 x 200 px. Working with Adruino and Raspberry Pi. Thanks to the technology of e-paper, the device does not tire your eyes like the traditional screens do. This kind of displays can be used for reading e-books and e-journals. Designed for use with the main module.
The subject of the sale is the display itself. The main module must be purchased separately.
|
The product is compatible with Adruino and Raspberry The manufacturer provides auser's guidefor Arduino and Raspberry Pi. |
Inputs
The basic module has an 8-pin connector.
| Pin | Description |
|---|---|
| VCC | Supply voltage: 3.3 V |
| GND | The grounf of the system. |
| DIN | Pin MOSI of SPI interface. |
| CLK | Clock pin of SPI. |
| CS | Chip select activated at low state. |
| DC |
Selection data / command. High state - data Low state - command |
| RST | External reset activated at low state. |
| BUSY | Output status "busy", activated at low state. |
Specification
- Supply voltage: 3.3 V
- Power (screen refresh): 26,4 MW
- Interface: SPI
- Chip: SSD1681
- External dimensions: 31.8 x 37,32 x 1.05 mm
- Display dimensions: 27,6 x 27,6 mm
- Pixel: 0,138 0,138 mm x
- Resolution: 200 x 200 px
- Viewing angle: 170 °
Useful links |
