- EOL
Attention! The product has been discontinued. Check other products in category. |
Description
Module with camera 2 MPx with a resolution of 1600 x 1200px and speed up to 60 frames per second. It gives the opportunity of taking photos and recording video clips. The device operates with a voltage of 3.3 V and 5 V, it communicates through a parallel interface, it has a sensitivity of 0.6 V/(lux*sec), the angle of view of 25°, the lens is 1/4".
Specification
- Operating voltage: 1.7 V to 3.3 V
- Resolution: 1600 x 1200 Px (2 Mpx)
- The number of frames per second:
- up to 60 FRAMES per second for CIF format
- up to 30 FRAMES per second for SVGA format
- up to 15 FRAMES per second for the format SXGA / UXGA
- Lens size: 1/4 "
- Sensitivity: 0,6 V/(lux*sec)
- Angle of view: 25°
- Output formats:
- 422/420 YUV / YCbCr 422
- RGB565/555
- compressed 8-bit data
- 8 / 10-bit RAW RGB Data
- Configuration of sensor through I2C bus
A detailed description can be found onthe manufacturer's website, it isalso available inthe library on GitHub. |
Pins
The device has soldered the 20-pin connector, pitch of 2.54 mm.
Pin | Description |
---|---|
VCC | Supply voltage is 3.3 V. |
GND | The ground of the system. |
SCL | Clock line of the interface Two-Wire. |
SDATA | Data line of the interface Two-Wire. |
VSYNC | Vertical synchronization. |
HREF | The HREFoutput. |
PCLK | The clock output of the matrix's sensor. |
XCLK | The input of the clock system. |
D9 | The video data output - bit 9 (MSB). |
D8 | The video data output - bit8. |
D7 | The video data output - bit 7. |
D6 | The video data output - bit 6. |
D5 | The video data output - bit 5. |
D4 | The video data output - bit 4. |
D3 | The video data output - bit 3. |
D2 | The video data output - bit 2 (LSB). |
D1 | The output of video data - bit 1 (10-bit mode). |
D0 | The video data output - bit 0 (mode of 10-bit). |
RESET | The system reset activated by low state. |
PWDN | Disabling the system activated by high state. |
Useful links |