Product description: GPIO pins expander - for Raspberry Pi Pico - Kitronik 5341
Kitronik Pin Breakout board is equipped with four rows of GPIO connectors, two of which are used to connect the Raspberry Pi Pico module. Kitronik Pin Breakout was created to facilitate the process of prototyping circuits and to allow the minicomputer board to be moved between projects without having to remove the connections. The great advantage of the product is also its compactness - small dimensions allow the use of the tile in atypical projects.
Raspberry Pi Pico
The Raspberry Pi Pico is equipped with the powerful RP2040 microcontroller developed by the Raspberry Pi foundation. The system is based on ARM Cortex M0 + clocked at 133 MHz, 264 KB of SRAM and 2 MB of Flash memory. The module has 26 GPIO pins, working with a voltage of 3.3 V. Raspberry Pi Pico can be programmed in C, C ++ and MicroPython.
Expander of pins for Raspberry Pi Pico - Kitronik 5341.
Expander of pins for Raspberry Pi Pico - Kitronik 5341 - rear view.
Features of the pins expander for the Raspberry Pi Pico
- The small size of the board allows it to be used in projects with limited space for components
- The product does not require soldering
- The board has four rows of GPIO sockets, two of which are used to connect the Raspberry Pi Pico
- The product allows you to move the Raspberry board without disconnecting the connections made
For the expander to work properly, a Raspberry Pi Pico board with soldered connectors is required.
Set contains
- 1x expander of pins for Raspberry Pi Pico - Kitronik 5341
Output expander specification
- Type: pin expander
- Socket Type: GPIO
- Resolution: 2x20
- Pins pitch: 2.54 mm
- Dimensions: 65 x 37 x 11.2 mm
- Mounting holes diameter: 3.3 mm
The Raspberry Pi Pico board is not included. It can be purchased separately in our store .
Kitronik pins expander with connected Raspberry Pi Pico board.
