Description
The solenoid allows to perform a linear - pulling motion with a voltage signal of 12 V. The range of the bolt is approximately 10 mm. The device has a mounting hole with a diameter of 4 mm. Powering wires with insulation removed at the ends, have a length of approx. 20 cm
|
Attention! The Solenoid consumes a relatively large current so connecting it directly to the pins of the microcontroller will lead to irreversible damage to the system. |
Specification
- Supply voltage: 12 V
- Current consumption: approx. 1.1 A
- Power: 13 W
- Wires: 20 cm, without connector
- The range of bolt: 10 mm
- Pull force: 0.5 kg
- Mounting holes with the diameter of 4 mm: 32 mm spacing
- Body dimensions: 36 x 30 x 25 mm
- Weight: 135 g
