Product description: OLED display 1.5 '' 128 x 128 px - SPI - 65K RGB - Waveshare 14747
Module with OLED display by Waveshare . Designed to work with boards such as Arduino, Raspberry Pi and STM32. The module communicates via a 4- and 3-wire SPI interface, it also has a built-in 1351 SSD driver. The diagonal of the screen is 1.5 " , and its resolution is 128 x 128 px . It can display 65 thousand colors from the RGB range. The size of a single pixel is 0.045 x 0.194 mm.
A compatible connection cable is also included with the display.
The product is compatible with Raspberry Pi, Arduino, STM32!
The manufacturer provides a Wiki page of the product that contains information about the module pins and a detailed user guide. You will also learn how to connect the display.
An example of connecting the Waveshare 14747 display with a Raspberry Pi 4B. The Raspberry Pi 4 module is not included in the kit - it must be purchased separately.
Description of the display pins from Waveshare
- VCC - power pin 3.3 V / 5 V
- GND - the ground of the system
- DIN - data output
- CLK - clock input
- CS - Chip Select - selection of chips activated with a low state
- DC - SPI pin
- 4-wire SPI: data / command selection (high for data, low for command)
- 3-wire SPI: connect to GND while keeping low
- RST - reset pin
Kit contents
- Display OLED 1.5 '' 128 x 128 px - SPI - 65K RGB from Waveshare
- An 8-pin connection cable with a plug and connectors with a pitch of 2.54 mm
Technical specification of the display
- Compatible with: Raspberry Pi, Arduino, STM32 etc.
- Display type: OLED
- Touch interface: no
- Screen diagonal: 1.5 "
- Screen resolution: 128 x 128 px
- Communication interface: 3-wire and 4-wire SPI
- Display colors: 65K RGB
- Driver: SSD1351
- Supply voltage: 3.3 V / 5 V
- Single pixel dimensions: 0.045 x 0.194 mm
- Display dimensions: 26.86 x 26.86 mm
- Tile sizes: 44.5 x 37 mm
Display OLED 1.5 '' 128 x 128 px - SPI - 65K RGB - Waveshare 14747.
