Description
Shield for Raspberry, based on DS2482-100 system, allows you to use the 1-Wire protocol. The module provides conversion to the I2C interface. It has built-in RJ12 connector, electrostatic protection and the possibility of a separate power supply.
The set includes connectors for self-soldering.
|
The product is compatible with Raspberry The manufacturer providesa user manual for the module. |
Power
The shield is powered directly from the Raspberry, and the led-out GPIO pins allow for connection to other shieldss. There is also the possibility of connecting an external power supply of 5 V, reducing the load of minicomputer. When using an external power source, remove the soldering jumper marked by Power to isolate the voltage of the Raspberry.
Specification
- Power supply: 5 V
- Driver:DS2482S
- Interface 1-Wire with a protecting ESD LED
- A possibility of cascade connection
- Cached port of 5 V
- External power input for 1-Wire interface.
- I2C address is selected, using jumpers.
- Voltage of operation of the I2C interface: 5 V
- Current on pins 1-Wire: 20 mA
- Total maximum current: 100 mA
- Included is connector of 2x20 pin and RJ12 for self-soldering
The subject of the sale is a shield,the Raspberry Pi Zero and spacers can be purchased separately.
