• EOL

3D Printer Vertex Nano K8600 Velleman - assembled

Index: VEL-10285 EAN: 5410329667542

3-axis 3D printer deisgned by Velleman. It is dedicated for print small elements with size up to 80 x 80 x 75 mm. The kit consists of the assembled device, which is ready to use.

3D Printer Vertex Nano K8600 Velleman - assembled
€321.90
€261.71 tax excl.
Product was replaced by other
Manufacturer: Velleman

Attention!

The product has been discontinued. Check others products incategory.

Description

3-axis 3D printer deisgned by Velleman. It is dedicated for print small elements with size up to 80 x 80 x 75 mm. The kit consists of the assembled device, which is ready to use.

The subject of the sale is the original printer by Velleman.

The manufacturer providesdetailed instructions forinstalling and operating the device.

The printer has a nozzle with a diameter of 1.75 mm. Supports the most popular 3D printing materials such as PLA and ABS. All the remaining ones were not fully tested by the manufacturer.

Specification

  • Power supply: 100 V to 240 V AC
  • The controller is based on the ATmega2560
  • Display 4 x 20 characters
  • Print technology:Fused Filament Fabrication (FFF)
  • Print speed: 40 mm/sec
  • Driving speed: 70 mm/sec
  • Filament diameter: 1.75 mm
  • Table dimensions: 80 x 80 mm
  • The maximum structural dimensions: 80 x 80 x 75 mm
  • Software: modified Marlin 3D Printer (possibile to change)
  • Work with software CuraEngine, repetier and Slick3r
  • Communication:SD card for direct printing and USB connector for updates
  • Dimensions 230 x 150 x 160 mm
  • Weight: 2.3 kg

ATTENTION!

Printer is not fully assembled. You need to tighten the extruder and the nozzle.

This is necessary to protect from damage during transportation.

Additionally, a modified construction for the engine mounts wa applied, when compared to the instructions on the assembly page, in order to fit the device in a cardboard box.

 

3D - print surface 80x80x75 mm
3D - type of printout FFF/FDM
3D - accuracy of printing 0.05 mm
3D - hotend amount 1
3D - filament diameter 1.75 mm
3D - printing speed 40 mm/s
3D - printing thickness 0.05 - 0.2 mm
3D - nozzle temp 245 °C
3D - table temp. BuildTak
Package width 0.001 cm
Package height 0.001 cm
Package depth 0.001 cm
Package weight 0.001 kg

Be the first to ask a question about this product!

Customers who bought this product also bought:

Products from the same category: