• EOL

Carbon monoxide sensor KIDDE K7DCO

Index: HUR-10614 EAN: 047871096336

A sensor that recognizes the concentration of carbon monoxide (CO) in the air. Powered by two AA batteries. Used for warning with an audio signal before harmful CO leaks.

Carbon monoxide sensor KIDDE K7DCO
€30.90
€25.12 tax excl.
Unavailable
Discontinued product
PayPal payment
Manufacturer: KIDDE

Attention!

The product has been discontinued. Check other products in category.

Description

A sensor that recognizes the concentration of carbon monoxide (CO) in the air. Powered by two AA batteries. Used for warning with an audio signal before harmful CO leaks. The sensor has an LCD display showing the CO concentration in the range from 0 to 999 PPM. It has a Test / Reset button, which allows you to check the correct operation of the device and deactivate the alarm. It also has a button that, when pressed, displays the highest detected CO level recorded in the memory of the sensor. After 10 years from the date of activation, the sensor will report the necessity of replacing the device.

Czujnik tlenku węgla (czadu) KIDDE 7DCO

In case of faulty operation or low battery level in the LCD panel displays the respective information graphically and turns on an audible alarm.

The sensor complies with the Polish standard PN-EN 50291-1:2018+AC:2021 for home carbon monoxide detectors and standard PN-EN 50291-2:2020 for use in vehicles, trailers and boats.

Attention!

Before connecting, refer to the kit instructions.

Specification

  • Sensor: electrochemical CO sensor KIDDE company
  • Power: 2x battery AA 1.5 V (included)
  • Operating temperature: -10 °C to + 45 °C
  • Storage temperature: from -20 °C to + 60 °C
  • Humidity: up to 90 %
  • Alarm of exceeded permissible concentration: 85 dB acoustically and optically (red LED)
  • Alarm low battery charge level: message Lb on the LCD display, audible signal, LED
  • Failure alarm: message Err on the LCD display, audible signal, LED
  • Alarm expiration: message END, an audible signal, LED
  • Buttons: test / reset, peak concentrations
  • The activation time of the alarm:
    • 30 PPM no alarm before the expiration of 120 minutes
    • 50 PPM, alarms within 60-90 minutes
    • 100ppm, alarms within 10-40 minutes
    • 300 PPM, alarms within 3 minutes
  • Dimensions: 118 x 70 x 40 mm
  • Mounting method: on wall or standing (mounting screws included)

Finds application in:

  • domestic boiler rooms with C.O. stoves burning solid fuels and flammable gas,
  • kitchens, bathrooms, equipped with gas appliances,
  • garages with the LPG installation,
  • school physics and chemistry laboratories,
  • public areas.
Sensor - service ready-to-use device
Smart Home CO sensor
Package width 19.5 cm
Package height 5 cm
Package depth 21.5 cm
Package weight 0.3 kg

Be the first to ask a question about this product!

Customers who bought this product also bought:

Products from the same category: