- EOL
Description
Ready module with1.8 " LCD displaythat lets youcontrol four home devices of 230 Vpowerup to 2.3 kWper channel via wi-fi network usingthe app on your smartphonefrom anywhere in the world. It also has the possibility of energy measurement. In order to useShelly4Pro, it is sufficient to configure the device via web browser. Design allows for mountingon a DIN rail. It also has the possibilityof measuring the consumption of electricity.
The device hasthreaded connectionfor mounting the wires, the design allows for installation of the device on a DIN rail.
Large, easy to read display allows to read the parameters.
Wiring diagram
Before connecting, switch off the voltage in a powered circuit. A driver must be installed in a place protected from the weather, protected from access by third parties.
Wiring diagram
The module has six pins in the form of bolted connections, to which you can connect the wires using a screwdriver:
- N- power, the neutral wire - ground.
- S1, S2, S3, S4- the possibility of connecting an external switch for the recpective outputs: O1, O2, O3, O4, a second line of the switch should be connected to the phase line, marked by the L symbol.
- O1, O2, O3, O4- voltage outputs of 1st, 2nd, 3rd, and 4th relay.
- L1, L2, L3, L4- power supply of 230 V, the positive pole.
Setting
For configuration, you need to connect to a wireless network device called "shelly4Pro-xxxxxx" where "xxxxxx" is the serial number of the device,then use the storeAndroid Playorthe AppStore to download the Shelly application. To prestage the device, you must click the default name of the device.
The configuration can be done also via the website, for this, you need to connect to a wireless network of the device, then just launch the Internet browser and enter the IP address of the device:http://192.168.33.1. A configuration website will appear where you must select your home wi-fi network and enter the password.
Specification
- Power supply: 110 V to 230 V AC (network)
- Energy consumption: less than 1W
- Built-in LCD 1,8 " display
- Number of outputs: 4
- The type of control outputs: relay
- Load current consumption: 10 A per output
- Load power: up to 2300 W per output
- Number of inputs: 4
- Input type: logical, shorted on the L line of the AC supply voltage
- Measurement of current consumption for each channel
- Communication standard: wi-fi 802.11 b/g/n
- Work mode
- direct connection (as Access Point),
- wi-fi connection through a standard router
- connection with access from anywhere via the Internet
- Compatible devices: iPhone, iPad, iPad Mini, Android, computers and mobile devices with HTML5 support
- Module dimensions: 90 x 52 x 57 mm
Useful links |
