- EOL
Description: M5Scale DIY Kit - set with digital scale and controller
TheM5Scale DIY KitfromM5Stackis a self-assembly kit containinga digital scale. The main electronic parts are: main controller,M5StickCdeveloper module andUnittypedigital scalemodule. The kit is equipped with a cantilever loadsensor, which is used to detect objects placed on the scale. The constructional covers are made ofacrylic, which has high resistance to mechanical damage.
Assembled M5Scale DIY Kit from M5Stack.
The kit does not include the weight.
Main module M5StickC and extension module Unit as a digital scale.
Technical Specification
- Controller: ESP32 dual-core 240 MHz
- SRAM: 520 KB
- Flash memory: 4 MB
- Supported software platform: Arduino, ULFlow, MicroPython
- WiFi communication: yes
- Bluetooth communication: yes
- Input voltage: 5 V DC
- Maximum input intensity: 500 mA
- Communication interface:
- USB: type C
- Grove: I2C + I / 0 + UART
- The screen:
- Type: TFT LCD
- Diagonal: 2''.
- Resolution: 160 x 60 px
- Bracket load sensor:
- Scope: 20 kg (in code 10 kg by default)
- Output sensitivity: 1.0 ± 0.1 mV / V
- Cable: power supply cable (red), positive signal (white), negative signal (green), ground cable (black)
- Microphone: built-in SPM1423
- Infrared transmitter: built-in
- IMU: built-in 6-axis MPU6886 / SH200Q
- LED: built-in red LED
- Energy management system: AXP192
- Operating temperature: 0°C to 40°C
- Main module housing: plastic, orange
- Module dimensions: 48 x 24 x 14 mm
- Dimensions of the set after assembling: 100 x 100 x 43 mm
Suggested use of the device
- Precision electronic scales
- Small scale
Set contents
- M5Scale kit
- Acrylic tile - 3 pieces.
- M5StickC developer module
- StickC overlay
- Unit-type overlay - digital scale
- Bracket load cell
- Washers - 6 pieces.
- Washers - 2 pieces.
- Mounting screws M3 - 6 pcs.
- Mounting screws M4 - 2 pcs.
- Mounting screws M5 - 2 pcs.
- Allen wrench - 2 pcs.
Set contents M5Scale.
