• EOL

FLORA - Ultimate GPS MTK3339 with antenna - Adafruit 1059

Index: ADA-03292 EAN: 5904422331634

Module for adding a read of the position and time from the GPS system in the smart clothing system from Adafruit Flora. Applied MTK3339 chip has the RTC system with the ability to attach the holder with the battery sustaining power.

FLORA - Ultimate GPS MTK3339 with antenna - Adafruit 1059
€43.90
€35.69 tax excl.
Unavailable
Discontinued product
PayPal payment
Manufacturer: Adafruit

Attention!

The product has been discontinued. Check other products in category.

Description

Board with the MTK3339 GPS module that can track up to 22 satellites on 66 channels. The system has a built-in antenna, the receiver's sensitivity is - 165 dB. It works with the pd voltages - 3 V to 5 V, it consumes only 20 mA of current. The update frequency is 10 Hz, which means the new data 10 times per second.

 

 

The module communicates via the digital UART communication interface (lines: TX and RX). It works with a voltage of 3.3 V, which means that you can connect it directly to the main controller of Adafruit Florawithconductive threads.

 

Check out how to start playing with the Adafruit Flora!

 

Monitoring the status

The LED indicator allows to monitor the status of the GPS module. Blinking with a frequency of about 1 Hz means finding the satellites, the appearance of light every 15 seconds indicates finding a FIX. The LED signal is displayed on the goldpin connector FIX so you can read it on the microcontroller.

Range

Built-in ceramic antenna yields a sensitivity of 165 dB, for increasing this parameter, you can atatch the  via the external version via connector u.FL. Since most of the available antennas have SMA connector, in our assortment, you will find a suitable adapter u.FL - SMA.

 

Data logging

The MTK3339 module has a built-in Flash memory which allows the recording of measuring data. You need to send an appropriate command from miconcontroller, and the collected data (time, date, latitude and longitude) will be stored in memory. At that time, the microcontroller goes into sleep mode and can be woken up only after reading the collected information. Internal memory allows you to record up to 16 hours of data.

Basic module features:

  • Supply voltage: from 3.3 V
  • Current consumption: 25 mA - when searching the satellites, 20 mA - during navigation
  • Communications: NMEA 0183, 9600 bps
  • Positioning accuracy: up to 3M
  • Sensitivity: -165 dBm
  • Update: 10 Hz
  • Low current consumption: about 20 mA
  • The ability to track up to 22 satellites
  • Built-in Flash memory to save data
  • Warm/cold start: 34 seconds
  • The LEDs indicating the FIX status 
  • Support for DGPS/WAAS/EGNOS
  • Maximum height: the theoretical, indicated by the manufacturer - 40 km, tested - 32 km
  • It has a built-in antenna and a connector for outputting an external u.FL version
  • Built-in RTC provides a record of the actual time
  • Provided free libraries facilitate the maintenance of the shield
  • Diameter: 30.5 mm
  • Height: 6.0 mm
  • Weight: 5.5 g

Examples of projects

 

Voltage to 3.3 V
Voltage from 3.3 V
Interface UART
GPS - Refreshing 10 Hz
GPS - Accuracy -165 dBm
Package width 0 cm
Package weight 0.007 kg

Be the first to ask a question about this product!

Customers who bought this product also bought:

Products from the same category: