• EOL

E-paper 4.3'' 800x600px - display module UART - Waveshare 10628

Index: WSR-04518 EAN: 5904422352851

Display of e-paper type with a diagonal of 4.3". E-Ink technology with a resolution of 800 x 600 px. Works with voltage from 3.3 V to 5.0 V, communicating via a simple serial UART interface. Kit includes compatible cables with female ends.

E-paper 4.3'' 800x600px - display module UART - Waveshare 10628
€108.90
€88.54 tax excl.
Unavailable
Discontinued product
PayPal payment
Manufacturer: Waveshare
Compatibility: Arduino

Attention!

The product has been discontinued. Check other products in category.

Description

Display of e-paper type with a diagonal of 4.3". E-Ink technology with a resolution of 800 x 600 px. Works with voltage from 3.3 V to 5.0 V, communicating via a simple serial UART interface. Kit includes compatible cables with female ends, which facilitate the connection of your display. The device has a set library of fonts, built-in Flash memory 128MB and the installation of 4 gray levels.

 

Thanks to the technology of e-paper, the device does not tire your eyes like traditional displays. They can be used for reading e-books and e-journals. 

Key features

  • The module is easy to use, communicates using basic serial UART interface i.e. RX and TX.
  • The displays work with a voltage of 3.3 V and 5 V.
  • The device consumes less than 5 mA current
  • There are font librariesinstalled in 32, 48 and 64 px (including Chinese and English characters).
  • The board has a built-in NAND Flash memory with capacity of 128 MB, which allows you to store fonts and images.
  • The SD card slot allows you to store large files on storage devices.
  • The manufacturer provides software that allows you to control the device with PC via converter USB - UART.
  • External dimensions-118 x 75 mm.

 

Connection

The module has 6 pins derived on the connector ribbon. Included is an adapter with a traditional female ends that allow you to connect the system to goldpin connectors raster 2.54 mm.

 

Pin Cable Arduino Description
6 RED 5V Supply voltage from 3.3 V to 5 V.
5 BLACK GND The ground of the system.
4 WHITE RX Data line UART.
3 GREEN TX Data line UART.
2 YELLOW D2 Standbymode.
1 BLUE N/C Reset, you can leave not connected.

 

In the case of usingArduino, we should remember that the kit includes a wire and socket. Therefore, the necessary wires are male-male, for example,a set of 65 PCs.

 

  • A detailed description of the communication Protocol and connection examples with other platforms, for example, XNUCLEO-F103RB you can find in the advanceduser instructions.

 

  • A sample program is available inthe design filesin the following directory:
    4_3inch-ePaper4_3inch-ePaper-demoArduino-epd

 

Screen - type e-paper
Screen - diagonal 4.3''
Screen - interface GPIO
Screen - touch no
Screen - resolution 800x600px
Test 4
Package width 10.5 cm
Package height 4.5 cm
Package depth 16 cm
Package weight 0.1 kg

Be the first to ask a question about this product!

Customers who bought this product also bought:

Products from the same category: