- EOL
|
Attention! The product has been discontinued. Check other products in category. |
Description
Chassis AlphaBot is a two-wheel platform to build a mobile robot. The kit includes a platform, two micro DC motors withwheelsand special fastenings. In addition, the kit includes a fingerprint sensor, speed measurementmodule,infrared proximity sensor and remote control. The platform is compatible with popular mini-controllers, for example, Arduinoor Raspberry Pi (you can connect them separately and they can also work together). The kit also includes acamera for Raspberry Pi, power supply and memory card of 16 GB.
The platform is simple to install, to launch the robot simply, fasten the engines, insert the wheels and add any controller (e.g.Arduino Uno). On the platform are driver of the engines LM298P, voltage regulator LM2596 for a stable 5 V voltage and the A/C TLC1543 converter allowing the use of analog sensors along with the Raspberry Pi. It also has a lot of connectors that facilitate the connection of additional modules.
|
The product is compatible with Arduino and Raspberry Pi The manufacturer offers auser guide along with a sample program for Arduino and Raspberry. |
The contents of the platform AlphaBot
- Interface of the Raspberry Pi:to connect to the Raspberry
- The Arduino interface:for connection to Arduino
- Connector forconnecting engines
- Connector forconnecting ultrasonic distance sensor
- Connector forconnecting servo
- Connector for connecting themodule of obstacle avoidance
- Connector forconnecting speed sensor
- Basket for batterries 18650(batteries not included - sold separately)
- A place to connect external power source
- Arduino connectors:to connect the caps for Arduino
- UART interface:for connecting the Bluetooth module
- SPI interface:for connecting the module NFR24L01
- A connector for connecting thesensor of line
- TLC1543 Converter:10-bit, enables the use of analog modules with the Raspberry Pi
- The bridge LM298P:for motor control, up to 2 A
- Diode preventing the reverse current
- The power switch
- LM2596:5 V voltage regulator
- The diode indicating the power
- Switch UART:switches on the interaction between Arduino and Raspberry
- IR Receiver:allows you to control the robot via the IR
- The choice of Arduino / Raspberry:selects which device controls the peripherals of the robot
|
Set requires self-assembly, the manufacturer provides amanualin a pdf file. |
The contents of the set
The set includes:
| L. p. | Photo | Description |
|---|---|---|
| 1 |  |
AlphaBot Baseboard. |
| 2 |  |
CameraHD B - camera with adjustable focus for the Raspberry Pi. |
| 3 |  |
The sensor of the line (line follower). |
| 4 |  |
Slot sensor - 2 pcs. |
| 5 |  |
The IRproximity sensor - 2 PCs. |
| 6 |  |
Motor with gear - 2 pcs. |
| 7 |  |
Servo-type micro - 2 PCs. |
| 8 |  |
Wheel - 2 PCs. |
| 9 |  |
Acrylic chassis. |
| 10 |  |
Brackets for engine mounting - 4 PCs. |
| 11 |  |
The support ball. |
| 12 |  |
20-slot encoder disk. |
| 13 |  |
IR remote control. |
| 14 |  |
4-pin connection cable, 4 cm, 2.54 mm pitch - 2 PCs. |
| 15 |
|
3-pin connecting cable, 4 cm, 2.54 mm pitch - 2 PCs. |
| 16 |  |
7-pin connecting cable, 4 cm, 2.54 mm pitch |
| 17 |  |
Screws and spacers. |
| 18 |  |
SanDisk Ultra533x microSD memory card 16GB 80MB/s UHS-I, class 10 with adapter. |
| 19 |  |
A microSDcard reader. |
| 20 |  |
Switching-mode power supply 5 V / 3 A with the microUSB connector. |
| 21 |  |
Pan Tilt- handle for the servos. |
|
The kit does not rechargeable batterries 18650. They must be purchased separately. |
Useful links |
