- EOL
|
Attention! The product has been discontinued. Check others products incategory. |
Description
Universal platform for Raspberry Pi with two wheels and balls support. It has two micro DC motors with the motor control unit, diode RGB, line sensor, obstacle avoidance, and remote control. The kit also includes a camera for Raspberry Pi, power supply and 16 GB memory card.
The platform is very easy to install, to run the robot just screw both platforms together and add the Raspberry Pi. On the platform there are the motor drivers TB6612FNG, twoN20 motors, two reflective IR sensors:ST188andITR20001/T, potentiometer, two wheels 42 mm and others. It also has a lot of connectors that facilitate the connection of additional modules.
|
The product is compatible with Arduino and Raspberry Pi The manufacturer offers auser guide, along withan exemplary programfor Arduino and Raspberry. |
Contents of the AlphaBot2-Base platform
- Control interface AlphaBot2: for connecting various sensors
- Ultrasonic interface module
- Indicators of avoiding obstacles
- Two ball supports type Omni
- ST188: relfective IR sensor for obstacle avoidance
- ITR20001/T:relfective IR sensor for line detecting
- Potentiometerto set the range of avoiding obstacles
- TB6612FNG: 2-channel H bridge - motors driver
- LM393: voltage comparator
- 2 motors micro N20: reducer 1:30, 6 V, 600 rpm
- 2 rubber wheels: diameter 42 mm, width 19 mm
- The power switch
- Battery container: supports battery type 14500
- WS2812B diode:RGB LCD
- LED power indicator
Contents of the AlphaBot2-PiZero platform
- Control interface AlphaBot2: AlphaBot2-Base
- LM2596: voltage regulator 5 V
- The Raspberry interface: for connecting Raspberry Pi to Zero / Zero In
- The IR receiver
- Buzzer
- FE1.1C: the chip of the USB hub
- Oscillator 12 MHz
- Converter USB - UARTvia USB
- Interface USB hub: expands ports on the Raspberry Pi Zero
- CP2102: USB - UART Converter module
- PCA9685: controller, servos,
- TLC1543: 10-bit Converter A/C, allows the use of analog sensors with the Raspberry
- Interface servo
- USB indicators
- Additional USB ports
The set
The ser includes:
| L. p. | Photo | Description |
|---|---|---|
| 1 |  |
Main boardAlphaBot2-Base. |
| 2 |  |
AlphaBot2-PiZero:adapter plate for Raspberry Pi is Zero. |
| 3 |  |
HD Camera B- camera with adjustable focus for the Raspberry Pi. |
| 4 |  |
Holder for supplying micro Pan/Tilt servos. |
| 5 |  |
Ultrasonic distance sensor. |
| 6 |  |
Tape connecting FC-20P. |
| 7 |  |
Screws and spacers. |
| 8 |  |
Mini screwdriver. |
| 9 |  |
Servo-type micro - 2 PCs. |
| 10 |  |
IR remote control. |
| 11 |  |
Memory card 533x, SanDisk Ultra microSD 16GB 80MB/s UHS-I class 10 without adapter. |
| 12 |  |
MicroSDCard reader. |
| 13 |  |
Switching power supply 5 V / 3 A, with the microUSB connector. |
|
The kit does not contain batteries14500andRaspberry Pi. They must be purchased separately. |
Useful links |
