- EOL
|
Attention! The product has been discontinued. Check other products in category. |
Description
Banana Pi M2 Magic is the minicomputer equipped with512 MB of RAM, processorAllwinner A33 Quad-core Cortex-A7 1.0 GHz, and the connectors, i.a.:1x USB, slotmicroSD, microphone, connector,CSI, DSI, connectoru.FL. Board has40 pins of GPIOand interfaces:UART, I2C, SPI. The M2 Magic also has a built-in modulewi-fi b/g/n and Bluetooth 4.0.
|
The advantage of the Banana Pi M2 Magic is a quad-core processor, integrated wi-fi and Bluetooth BLE, CSI and DSI connector, and the small size of the board: 51 x 51 mm. |
Specification
- CPU: Allwinner A33
- Core: ARM Cortex-A7 quad-core,
- Clock Speed: 1.0 GHz
- RAM: 512 MB of DDR3
- Graphics: Mali400MP2 GPU @600MHz, with support of OpenGL ES 2.0
- Integrated wi-fi b/g/n and Bluetooth 4.0 based on system Ampak AP6212
- A slot u.FL to connectan external antenna wi-fi
- Slot forSD memory cards
- 1 USB port
- 1 port for micrUSB OTG
- 40 pins of GPIO
- 3-pin connector for debugging
- Built-in microphone
- Battery connector
- Interface for camera connection: CSI for 8-bit YUV42 CMOS 1080p @30fps
- Embedded buttons: Power, Reset
- Power supply parameters: 5 V / 2 A (in our assortment available isa special adapter)
- Power supply: DC slot of 4.0/1.7 mm
- Dimensions: 51 x 51 mm
- Weight: 40 g
Operating system
Banana Pi uses a microSD memory card as a drive. The operating system can be uploaded via the computer with the reader. Board supports, i.a. systems: Linux and Android.
Communication
Banana Pi has basic communication interfaces that can be found in office computers of PC class. In addition to the previously listed connectors of audio and video, the user has at his or her disposal:
- One USB connector and one USB OTG, to which can be connected, for example, a mouse, a keyboard, a wi-fi card or USB flash drive. If you find that the slots are too short, you can increase their number using an external USB HUB.
- module wifiBanana Pi M2 Magic has a built-in wi-fi module with connector forexternal antenna.
- Bluetooth 4.0for wireless communication
- 40 x GPIO- outputs/inputs with general purpose that can be used to control the LEDs, buttons, drivers of motors. Among them are the pins supporting interfaces: I2C, SPI and UART.
- pin CSI for the camera connector for the camera designed for Banana PI.
- DSI connectorto connect screen
Banana Pi M2 Magic - top view
Power
As a power source, the system uses the DC connector of 4.0/1.7 mm. The required parameters of power supply are 5 V and 2 A. In our assortment, available isa special power supply.
Useful links |
