- EOL
Attention! The product has been discontinued. Checknew version of this product. |
Description
Camera module for Arduino 5 MPx with a resolution of 2592 x 1944 px and speeds up to 120 frames per second. It extends the capabilities of the microcontroller with the ability to shoot photos and record videos. The device operates with a voltage of 3.3 V, it communicates via SPI, viewing angle 24 ° lens 1/4".
The product is compatible with Arduino |
Block diagram
The device consists of a sensor and an electronic part with a data buffer and bus controller.
A block diagram of the camera module ArduCAM-Mini.
Specification
- Working voltage: 3.3 V / 5
- Maximum resolution: 2592 px x 1944 (5 MPx)
- The number of frames per second:
- up to 120 FRAMES per second for the format of QVGA (320x240px)
- up to 60 FRAMES per second for VGA 640x480px)
- up to 60 fps for 720p (1280c720px)
- up to 30 FRAMES per second for 1080p (1920x1080px)
- up to 15 FRAMES per second for 5 MPx (2592x1944px)
- Lens size: 1/4 "
- Pixel size: 1.4 µm x 1.4
- Range of image: 3673,6 x 2738,4 µm
- Angle of view: 24 °
- Output format: JPEG
- Space between mounting holes: 34 mm
- Module dimensions: 35 x 27 mm
Pins
The device has soldered the 20-pin connector, pitch of 2.54 mm.
Pin | Name | Description |
---|---|---|
1 | VCC | Supply voltage is 3.3 V. |
2 | GND | The ground of the system. |
3 | SCL | Clock line of the interface Two-Wire. |
4 | SDATA | Data line of the interface Two-Wire. |
5 | VSYNC | Not connected. |
6 | HREF | Not connected. |
7 | PCLK | Not connected. |
8 | XCLK | The output of the system clock. |
9 | DOUT9 | Output MIPI MDP1. |
10 | DOUT8 | Output MIPI MDN1. |
11 | DOUT7 | Output MIPI MCP. |
12 | DOUT6 | Output MIPI MCN. |
13 | DOUT5 | Output MIPI MDP0. |
14 | DOUT4 | Output MIPI MDPN0. |
15 | DOUT3 | Not connected. |
16 | DOUT2 | Not connected. |
17 | M+ | Power VCM. |
18 | GND | Ground VCM. |
19 | RST | The reset is activated via low state. |
20 | PWDN | Disabling the system by activating state. |
Useful links |