Product description: Magigoo Pro PA printing adhesive - 50 ml
Magigoo Pro PA printing adhesive - 50 ml is a preparation that improves the adhesion of the first 3D print layers , designed for use with filaments: PA12 , PA66 , PA6 . The product improves the bonding properties between the first filament layers and the 3D printer 's worktable. To avoid problems caused by poor adhesion of the fiber to the table top, it is recommended to use Magigoo Pro PA. It is recommended to wipe off the remains of the adhesive using a damp cloth.
How to use the preparation
- Shake the bottle.
- Apply the preparation on the printer's worktop by pressing the tip on the printer's worktop.
- Print as recommended by the filament / printer manufacturer.
- Leave to cool and remove. The print should pop off immediately.
- Use a damp cloth to clean the worktop from the remnants of glue.
If the glue is too strong, use a little water to dissolve the agent, and then you can gently lift the printout to detach it from the 3D printer's worktop.
Specification of Magigoo Pro PA printing adhesive
- Filament glue:
- PA12
- PA66
- PA6
- Package capacity: 50 ml
Useful links |