Gas concentration meter - Wintact WT8811

Index: BNT-19577 EAN: 5903738810796
Gas content meter in the air, equipped with clear, color display. The device, thanks to high quality sensors, is characterized by high accuracy and repeatability of indications. It allows for measurement of 4 groups of gases: oxygen, carbon monoxide, hydrogen sulfide and all flammable gases. Sealed housing of Wintact WT8811 was protected by a protective layer of rubber, which prevents damage to the meter in case of fall or exposure to excessive dust.
€216.78
€176.25 tax excl.
Waiting time approx. 5-14 days
Only on request
30-day returns
PayPal payment

Product description: Gas level meter - Wintact WT8811

Gascontentmeterin the air, equipped with clear,color display. The device, thanks to high quality sensors, is characterized by high accuracy and repeatability of indications. Allows you to measure4 groups of gases: oxygen, carbon monoxide, hydrogen sulfide and all flammable gases. Tight housing of Wintact WT8811 was protected by protective layer of rubber, which prevents damage of the meter in case of fall or exposure to excessive dust. The product is used in many industries, including: petroleum, chemical, metallurgical, refinery, gas distribution, biochemical medicine, agricultural and environmental research.

Miernik stężenia gazów - Wintact WT8811

Gas concentration meter - Wintact WT8811.

Miernik wykorzystywany jest w różnych gałęziach przemysłu

The meter is used in various industries.

Compliance with calibration procedures and standards

  • GB3836.1-2010 Explosive Atmospheres Part 1: General Requirements for Equipment
  • GB3836.4-2010 Explosive Atmospheres Part 4: Equipment with
  • Intrinsically Safe "I" Protection
  • GB15322.3-2003 Portable Combustible Gas Detectors Part 3: Portable Combustible Gas Detectors with a Measurement Range of (0~100) %LEL
  • JJG693-2011 Verification Standards for Combustible Gas Detection Alarm
  • JJG 365 - 2008 Verification Procedures for Electrochemical Oxygen Tester
  • JJG695-2003 Verification Procedure for Hydrogen Sulfide Gas Detector
  • JJG695-2003 Verification Procedure for Hydrogen Sulfide Gas Detector

The above provisions relate to norms and standards for the safe use of portable equipment in atmospheres with high concentrations of flammable gases, spark protection, alarm systems, taking into account the various gases, in particular oxygen, carbon monoxide and hydrogen sulfide.

Gas concentration meter specification - Wintact WT8811

  • Gas detection parameters:
    • Flammable gases: 0 to 100% LEL (resolution: 0.1)
    • Oxygen: 0% to 30% VOL (resolution: 0.1)
    • Hydrogen sulphide: 0 to 100 µmol / mole (resolution: 0.1)
    • Carbon monoxide: 0 to 1000 µmol / mole (resolution: 1)
  • Accuracy: ≤ ± 5% FS
  • Response time: less than 30 s (for 90% of cases)
  • Storage temperature: from -10°C to 55°C
  • Storage humidity: up to 85% RH
  • Operating temperature: -20°C to 50°C
  • Operating humidity: up to 95% RH (non-condensing)
  • Alarm types available: audible, light, vibration, LED
  • Data logging and review: up to 120000 records continuously
  • Colour LCD display showing real time data and system status
  • Rubber housing coating to protect against self-ignition
  • Power supply: DC 3.7 V (1800 mAh lithium battery)
  • Battery life: approx. 8 hours continuous operation
  • Dimensions: 71 x 153 x 49 mm
  • Weight: 218.7 g (incl. battery)

Wintact WT8811 - widok od przodu urządzeniaWintact WT8811 - front view.

Same-day shipping

  • Crediting the payment for the order on our account on a business day before 10:00 AM means sending the goods on the same day.
  • All packages are being delivered by GLS Group courier and covered with insurance up to 1200 EUR.
  • You will receive a link to track your package and monitor the progress of delivery as soon as it is shipped.

Terms of delivery 

GLS - zone 1

Austria, Belgium, Croatia, The Czech Republic, Denmark, Germany, Netherlands, Poland, Slovakia 

  • Delivery time: 2-4 days
  • Delivery cost: from 4.18 EUR
  • Insurance: 1200 EUR
GLS - zone 2

Bulgaria, Estonia, France, Hungary, Italy, Latvia, Lithuania, Luxembourg, Portugal, Romania, San Marino, Slovenia

  • Delivery time: 2-5 days
  • Delivery cost: from 5.35 EUR
  • Insurance: 1200 EUR
GLS - zone 3

Finland, Greece, Ireland, Spain, Sweden 

  • Delivery time: 2-7 days
  • Delivery cost: from 7.67 EUR
  • Insurance: 1200 EUR

Payment methods

Card image cap
PayPal
  • Botland is a PayPal verified seller. Protect your financial information with this fast, safe and secure online payment system.

Card image cap
PayU
  • Choose easy and quick PayU e-payment method. Your financial information will stay secure.

Products from the same category

Carbon monoxide and flammable gases sensor MQ-9 - semiconductor - blue module

The sensor detects the concentration of CO (carbon monoxide) and flammable gases. It has the goldpin pins, pitch of 2,54 mm. It is powered with the voltage of 5 V. It has...
Index: MOD-03029
Index: MOD-03029
Waiting for confirmation of delivery date
Regular price €2.97 Price €2.97

Smoke and flammable gas sensor MQ-2 - semiconductor - blue module

Module with smoke and flammable gas MQ-2 detector with the goldpin pins, pitch of 2.54 mm. It is powered with the voltage of 5 V. It has digital and analog output, making it...
Index: MOD-03027
Index: MOD-03027
In stock, shipping 24 hours!
Check quantity
Regular price €2.15 Price €2.15

Stand for MQ - gas sensor - Pololu 1479

Stand that allows mounting of sensors from MQ series.
Index: PLL-00238
Index: PLL-00238
In stock, shipping 24 hours!
Check quantity
Regular price €1.28 Price €1.28

Grove - smoke and flammable gases - MQ2 - analog - semiconductor

Module with gas sensor MQ2 capable of detecting smoke and leakage of gaseous fuels such as LPG, methane, hydrogen, butane etc. The module works with 5 V and communicates...
Index: SEE-15175
Index: SEE-15175
Available, 24h shipping!
Check quantity
Regular price €6.94 Price €6.94

CO sensors tester - spray 400ml

The preparation is designed for testing the carbon monoxide and smoke detectors. It enables the testing of the correctness of operation of the CO detector. Capacity: 400 ml.
Index: CHE-08275
Index: CHE-08275
In stock, shipping 24 hours!
Check quantity
Regular price €6.49 Price €6.49

Enviro pHAT - temperature, humidity, pressure, light, gas, ADC sensor with microphone - HAT for Raspberry Pi

Overlay for Raspberry Pi equipped with BME280 temperature, pressure and humidity sensor, LTR-559 light and proximity sensor, MICS6814 analog gas sensor, ADC ADS1015...
Index: PIM-17074
Index: PIM-17074
Available, 24h shipping!
Check quantity
Regular price €56.20 Price €56.20

Gas connections tightness tester - 400ml spray

Odourless water-based agent to detect any gas or air leakage, even at low pressure. Package capacity is 400 ml.
Index: CHE-05708
Index: CHE-05708
Available, 24h shipping!
Check quantity
Regular price €3.69 Price €3.69

Temperature, humidity, pressure and gas sensor - BME688 - SPI/I2C - STEMMA QT/Qwiic - Adafruit 5046

Multifunctional sensor that combines sensors for temperature, humidity, pressure and VOC gas. It has an embedded Bosch BME688 chip. Manufactured by Adafruit, it uses SPI and...
Index: ADA-19788
Index: ADA-19788
Available
Check quantity
Regular price €28.19 Price €28.19

LPG, propane and hydrogen sensor MQ-2 module - semiconductor - Waveshare 9529

Module with sensor MQ-2 detecting LPG, propane and hydrogen . It is powered  with the voltage from 2.5 V to 5 V. It has digital and analog output, making it compatible with...
Index: WSR-05521
Index: WSR-05521
In stock, shipping 24 hours!
Check quantity
Regular price €4.99 Price €4.99

LPG, natural gas and carbon gas sensor MQ-5 module - semiconductor - Waveshare 9531

Module with sensor MQ-5 detecting LPG, natural gas and coal gas . It is powered with the voltage from 2.5 V to 5 V. It has digital and analog output, making it compatible with...
Index: WSR-05522
Index: WSR-05522
In stock, shipping 24 hours!
Check quantity
Regular price €5.64 Price €5.64

Stand for gas sensors series Figaro TGS2xxx

Stand, facilitating the connection of gas sensors from the series Figaro TGS2xxx for the printed circuit board.
Index: MOD-05564
Index: MOD-05564
In stock, shipping 24 hours!
Check quantity
Regular price €4.32 Price €4.32

Smoke sensor WSS1 WiFi Tuta Smart Life

A smoke detector that communicates via WiFi and the Tuya or Smart Life app. The device is used to detect smoke in rooms and signal its detection with notifications to the...
Index: REM-20563
Index: REM-20563
Available
Check quantity
Regular price €26.89 Price €26.89