N20-BT04 micro 30:1 1000RPM motor - 12V
N20-BT04 micro 30:1 1000RPM motor - 12V
N20-BT04 micro 30:1 1000RPM motor - 12V
N20-BT04 micro 30:1 1000RPM motor - 12V
N20-BT04 micro 30:1 1000RPM motor - 12V
N20-BT04 micro 30:1 1000RPM motor - 12V
N20-BT04 micro 30:1 1000RPM motor - 12V
N20-BT04 micro 30:1 1000RPM motor - 12V
N20-BT04 micro 30:1 1000RPM motor - 12V
N20-BT04 micro 30:1 1000RPM motor - 12V
N20-BT04 micro 30:1 1000RPM motor - 12V
N20-BT04 micro 30:1 1000RPM motor - 12V - zdjęcie 1
N20-BT04 micro 30:1 1000RPM motor - 12V - zdjęcie 2
N20-BT04 micro 30:1 1000RPM motor - 12V - zdjęcie 3
N20-BT04 micro 30:1 1000RPM motor - 12V - zdjęcie 4
N20-BT04 micro 30:1 1000RPM motor - 12V - zdjęcie 5
N20-BT04 micro 30:1 1000RPM motor - 12V - zdjęcie 6
N20-BT04 micro 30:1 1000RPM motor - 12V - zdjęcie 7
N20-BT04 micro 30:1 1000RPM motor - 12V - zdjęcie 8
N20-BT04 micro 30:1 1000RPM motor - 12V - zdjęcie 9
N20-BT04 micro 30:1 1000RPM motor - 12V - zdjęcie 10
N20-BT04 micro 30:1 1000RPM motor - 12V - zdjęcie 11

Micro motor N20-BT04 30:1 1000RPM - 12V

Index: DNG-12544
BOTLAND B. DERKACZ SPÓŁKA JAWNA Opinie z ekomi-pl.com

N20 series miniature motor with 30:1 gearing, has 1000 RPM, torque is 0.6 kg*cm (0.059 Nm). The supply voltage is from 3V to 12V.

€4.48
€3.64 tax excl.

Available, 24 hours shipping!
(Check quantity)
Shipping in 24 hours
30-day returns
PayPal payment
Manufacturer: N20 Motors

Specification

Power supply voltage:

3 V - 12 V

Non load current (12 V):

85 mA

Speed without load (12 V):

1000 rpm

Torque (12 V):

0.6 kg*cm (0.059 Nm)

Gear ratio:

30:1

Shaft diameter:

3 mm

Body dimensions:

24 x 10 x 12 mm

The weight:

10 g

Two-sided shaft:

NO

Description

The small, lightweight yet powerful N20 series engines, compatible with Polol's engines, are used as drive units by robot constructors. The units can be powered up to 12 volts (depending on the model), with a power output of over 3 volts. The optimum voltage at which the power to strength ratio is best is 6 V.

Silnik N20

Motor dimensions

The motor body is a 24 x 10 x 12 mm cuboid. The gearbox is 9,27 mm long. There is a 3 mm D-shaped shaft at the output. Total weight is about 10 g.

The drawing shows the dimensions of the micro motor with the gearbox.

Accessories

The N20 motors are compatible with Polol motor accessories.

Silnik N20

  • Wheels, crawlers,hubs:Wealso offer wheels and crawlers, matching Pololmicroengine shafts. Installation of non-standard wheels is facilitated by adapters.


Silnik N20

Silnik N20

Attention!

N20 motors are not compatible with micro Polol motor encoders.

Diameter 12 mm
Length 24 mm
Voltage to 3.0 V
Voltage from 12.0 V
Motor - current 100 mA
Motor - gear 30:1
Rotation speed 1000 obr/min
Torque 0,6 kg*cm
Mass 10 g
Motor - shaft 3 mm

Same-day shipping

  • Crediting the payment for the order on our account on a business day before 10:00 AM means sending the goods on the same day.
  • All packages are being delivered by GLS Group courier and covered with insurance up to 1200 EUR.
  • You will receive a link to track your package and monitor the progress of delivery as soon as it is shipped.

Terms of delivery 

GLS - zone 1

Austria, Belgium, Croatia, The Czech Republic, Denmark, Germany, Netherlands, Poland, Slovakia 

  • Delivery time: 2-4 days
  • Delivery cost: from 4.18 EUR
  • Insurance: 1200 EUR
GLS - zone 2

Bulgaria, Estonia, France, Hungary, Italy, Latvia, Lithuania, Luxembourg, Portugal, Romania, San Marino, Slovenia

  • Delivery time: 2-5 days
  • Delivery cost: from 5.35 EUR
  • Insurance: 1200 EUR
GLS - zone 3

Finland, Greece, Ireland, Lichtenstein, Spain, Sweden 

  • Delivery time: 2-7 days
  • Delivery cost: from 7.67 EUR
  • Insurance: 1200 EUR

Payment methods

Card image cap
PayPal
  • Botland is a PayPal verified seller. Protect your financial information with this fast, safe and secure online payment system.

Card image cap
PayU
  • Choose easy and quick PayU e-payment method. Your financial information will stay secure.

Customers who bought this product also bought:

Micro motor N20-BT09 298:1 100RPM - 12V

The N20 series miniature motor with 298:1 gearing, has 100 RPM, torque is 5 kg*cm (0.49 Nm). The supply voltage is from 3V to 12V.
Index: DNG-12548
Index: DNG-12548
Available, 24 hours shipping!
(Check quantity)
Regular price €4.48 Price €4.48

DRV8838 - single-channel motor controller 11V/1,7A - Pololu 2990

Single-channel DC motor controller. Continuous current per channel 1.7 A (momentary to 1.8 A). Supply voltage up to 11 V.
Index: PLL-02695
Index: PLL-02695
Available, 24h shipping!
(Check quantity)
Regular price €3.13 Price €3.13

MakeBlock 70522 - M3 Screws Length: 8mm - 10 pieces

M3 screw thread with 8 mm length for cross screwdriver d=3 mm. Made of stainless steel. Set includes 10 pieces.
Index: TRB-10314
Index: TRB-10314
Unavailable
Regular price €0.68 Price €0.68

M3 PH Screws Length: 30mm with Washers - 10pcs.

M3 screw with the length of 30 mm and simple springy washer. Kit of 10 pieces.
Index: NSZ-07805
Index: NSZ-07805
In stock, shipping 24 hours!
(Check quantity)
Regular price €0.25 Price €0.25

M3 Nuts - 10 pcs.

Nuts M3. Price for 10 pieces.
Index: NSZ-00806
Index: NSZ-00806
Available, 24 hours shipping!
(Check quantity)
Regular price €0.34 Price €0.34

Connecting cables Male-female 20cm yellow - 100pcs.

Set of 100 copper connecting wires 26AWG with the length of 20 cm in yellow color.
Index: DNG-11906
Index: DNG-11906
In stock, shipping 24 hours!
(Check quantity)
Regular price €5.60 Price €5.60

Connecting cables male-to-male 20cm - 40pcs

Set includes 40 PCs of multi-colored hook-up wires with a length of 20 cm ended, on both sides, with the male connector.
Index: KAB-01223
Index: KAB-01223
In stock, shipping 24 hours!
(Check quantity)
Regular price €1.34 Price €1.34

Cable set 15cm black - 100pcs

Set of 100 cables with the length of 15 cm with the removed insulation at the ends. Ends are tin plated to maintain rigidity and facilitate the soldering.
Index: KAB-04001
Index: KAB-04001
In stock, shipping 24 hours!
(Check quantity)
Regular price €1.98 Price €1.98

Set of 15cm red cables - 100pcs

Set of 100 15 cm long wires with the insulation removed at the ends. The ends are tinned to maintain rigidity and facilitate soldering.
Index: KAB-04000
Index: KAB-04000
Available, 24 hours shipping!
(Check quantity)
Regular price €2.00 Price €2.00

Connecting cables female-male 20cm - 40pcs

Set includes 40 PCs of multi-colored connecting cables with a length of 20 cm, on one side ended with a female  connector, on the other, with a male connector.
Index: KAB-01067
Index: KAB-01067
In stock, shipping 24 hours!
(Check quantity)
Regular price €1.34 Price €1.34

Insulation tape 19mmx10m black

Black, 19 mm wide and 10 m long PVC insulation tape.
Index: NSZ-00532
Index: NSZ-00532
Available, 24h shipping!
(Check quantity)
Regular price €0.47 Price €0.47

Lever switch On-On 250V/3A - 5pcs.

Switch with lever, two-state  for printing with 3 contacts with the load of 3A 250V or 6A 125 . Pins pitch is 4.7 mm, total height is 31.0 mm. The set includes nut and...
Index: UCC-02478
Index: UCC-02478
In stock, shipping 24 hours!
(Check quantity)
Regular price €1.85 Price €1.85

Products from the same category

Micro motor N20-BT09 298:1 100RPM - 12V

The N20 series miniature motor with 298:1 gearing, has 100 RPM, torque is 5 kg*cm (0.49 Nm). The supply voltage is from 3V to 12V.
Index: DNG-12548
Index: DNG-12548
Available, 24 hours shipping!
(Check quantity)
Regular price €4.48 Price €4.48

Micro motor N20-BT05 50:1 625RPM - 12V

N20 series miniature motor with 50:1 gearing, has 625 RPM, torque is 1.1 kg*cm (0.108 Nm). The supply voltage is from 3V to 12V.
Index: DNG-12545
Index: DNG-12545
Available, 24 hours shipping!
(Check quantity)
Regular price €4.48 Price €4.48

Micro motor N20-BT07 100:1 320RPM - 12V

The N20 series miniature motor with 100:1 gearing, has 320 RPM , torque is 2.2 kg*cm (0.216 Nm). The supply voltage is from 3 V to 12 V.
Index: DNG-12547
Index: DNG-12547
Available, 24 hours shipping!
(Check quantity)
Regular price €4.48 Price €4.48

Micro motor N20-BT01 75:1 220RPM - 6V

N20 series miniature motor with 75:1 gearing, has 220 RPM , torque is 0.8 kg*cm (0.078 Nm). The supply voltage is from 1 V to 6 V.
Index: DNG-12541
Index: DNG-12541
Available, 24 hours shipping!
(Check quantity)
Regular price €4.48 Price €4.48

Micro motor N20-BT24 50:1 625RPM - 9V

The N20 series miniature motor with 50:1 gearing, has 625 RPM, torque is equal to 1.1 kg*cm (0.107 Nm). The supply voltage is from 3V to 9V.
Index: DNG-12566
Index: DNG-12566
Available, 24 hours shipping!
(Check quantity)
Regular price €4.28 Price €4.28

Micro motor N20-BT43 210:1 100RPM - 6V

The miniature motor of N20 series with 210:1 gearing, has 100 rpm, torque is 2.6 kg*cm (0.255 Nm). The supply voltage is 6 volts.
Index: DNG-12605
Index: DNG-12605
Available, 24 hours shipping!
(Check quantity)
Regular price €4.48 Price €4.48

Micro motor N20-BT39 1000:1 14RPM - 9V

The N20 series miniature motor with 1000:1 gearing, has 14 RPM, torque is equal to 5 kg*cm (0.49 Nm). The supply voltage is from 3V to 9V.
Index: DNG-12600
Index: DNG-12600
Available, 24 hours shipping!
(Check quantity)
Regular price €7.43 Price €7.43

Micro motor N20-BT34 298:1 45RPM - 9V

The miniature motor in the N20 series with 298:1 gearing, has 45 RPM , and the torque is 2.9 kg*cm (0.284 Nm) . The supply voltage ranges from 3 V to 9 V.
Index: DNG-12593
Index: DNG-12593
Available, 24 hours shipping!
(Check quantity)
Regular price €4.48 Price €4.48

Micro motor N20-BT44 250:1 90RPM - 6V

The N20 series miniature motor with 250:1 gearing, has 90 RPM, torque is equal to 3 kg*cm (0.294 Nm). The supply voltage is 6 volts.
Index: DNG-12606
Index: DNG-12606
Available, 24 hours shipping!
(Check quantity)
Regular price €4.48 Price €4.48

Micro motor N20-BT35 150:1 200RPM - 9V

The N20 series miniature motor with 150:1 gearing, has 200 RPM , torque is 2.9 kg*cm (0.284 Nm). The supply voltage is from 3V to 9V.
Index: DNG-12594
Index: DNG-12594
Available, 24 hours shipping!
(Check quantity)
Regular price €4.48 Price €4.48

Micro motor N20-BT41 100:1 150RPM - 6V

The N20 series miniature motor with 100:1 gearing, has 150 RPM, torque is 0.3 kg*cm (0.029 Nm). The supply voltage is 6 volts.
Index: DNG-12603
Index: DNG-12603
Waiting time approx. 4-6 weeks
Regular price €4.48 Price €4.48

Micro motor N20-BT17 50:1 250RPM - 9V

The N20 series miniature motor with 50:1 gearing, has 250 RPM, torque is 0.5 kg*cm (0.049 Nm). The supply voltage is from 3V to 9V.
Index: DNG-12556
Index: DNG-12556
Available, 24 hours shipping!
(Check quantity)
Regular price €4.48 Price €4.48