Product description: Filament Prusa PLA 1.75 mm 2 kg - Recycled
The filament from Prusa is used in FDM / FFF 3D printers. The product consists of 100% recycled Prusament PLA. There are no other additives or pigments in the mix, so each batch has a different color. Filament with a diameter of 1.75 mm and a net weight of 2 kg . PLA is biodegradable, made of renewable natural resources. It is characterized by low temperature resistance, dedicated for indoor use.
Filament Prusa PLA 1.75 mm 2 kg - Recycled - each spool has a different color.
Features of the Prusament of PLA
- Made of biodegradable raw materials
- It has a low melting point
- It comes from recycling
- Each spool of material has a different color due to the manufacturing process
- Hard but brittle
- It has a low temperature resistance
- Elements printed with PLA begin to lose their mechanical strength at temperatures above 60 ° C
- It has a low resistance to UV radiation, recommended for indoor use
- It is recommended to connect the printout elements made with the use of PLA material with the use of glue
- The maximum drying temperature for Prusament PLA is 50 ° C for a minimum of 4 hours
Suggested filament printing parameters
| Head temperature | 205 ° C to 225 ° C |
| Table temperature | From 40 ° C to 60 ° C |
| Cooling the print | Recommended |
|
Due to the differences in the design of printers, the above data should be treated as guidelines, and the appropriate values should be determined experimentally. |
Technical specification and physical properties of the Prusa filament
| Parameter | Range |
|---|---|
| Filament diameter | 1.75 mm |
| Filament dimensional tolerance | +/- 0.02 mm |
| Use | FDM / FFF 3D printing |
| Chemical name of the filament | Polylactic acid (Polylactide) |
| Material shrinkage | Short |
| Color | Each spool is different |
| Spool - material | PLA Recycled |
| Spool diameter | 200 mm |
| Spool width | 125 mm |
| Mounting hole diameter | 52 mm |
| Net product weight | 2 kg |
