- EOL
|
Attention! The product has been discontinued. Check other products in category. |
Specification
- The programmer has a polymer fuse (500 mA, reusable) securing the USB port of the computer
- The device allows you to power circuits wth voltage 5V
- Requires additional USB cable
- Programming speed reaches 5kB/s
- Works with the following operating systems: Windows XP, Windows Vista, Windows 7, Windows 8, Linux
- The programmer is easy to use, and two LEDs (red and green) allow to monitor the device status
- Has three jumper configuration
To start the work with the programmer you just need to install drivers. A detailed description of installation and operation is the user's guide.
|
The device can be used for programming modules Arduino Uno and Leonardo, if necessary install a new bootloader. To easily connect the boards there is also a very handy adapter ISP type KANDA. |
Included
- The programmer is compatible with USBasp (shown in the photo above)
- IDC tape 50 cm long, with corresponding ferrules for connectors of the KANDA type
- 2 jumpers to configure the programmer
Description
The programmer AVR USBasp is fully compatible with the programmer to "USBasp" created by Thomas Fischla. It can be used to program microcontrollers of the ATMEL AVR family via the USB port on the PC. USBasp supports many popular environments for developing software and applications designed for downloading programs, including: Bascom, AVRDude, WinAVR, and many others.
Jumper
J1 - Service - link for the software update (should be removed during normal operation)
J2 - Slow SCK jumper to slow down the frequency programming of the target system
J3 - Supply target - Assembled jumper J3 powers up the system timer from the USB port (5V approx.)
Supported microcontrollers
- ATmega8, ATmega88, ATmega8515, ATmega8535, ATmega128, ATmega1280, ATmega1281, ATmega16, ATmega161, ATmega162, ATmega163, ATmega164, ATmega103, ATmega32, ATmega324, ATmega328, ATmega329, ATmega3290, ATmega48, ATmega64, ATmega640, ATmega644, ATmega649, ATmega6490
- ATtiny12, ATtiny13, ATtiny15, ATtiny2313, ATtiny24, ATtiny25, ATtiny26, ATtiny45, ATtiny84, ATtiny85
- AT90S2313, AT90S2333, AT90S1200, AT90S2343, AT90S4414, AT90S4433, AT90S4434, AT90S8515, AT90S8535, AT90USB646, AT90USB647, AT90USB1286, AT90USB1287, AT90PWM2, AT90PWM2B, AT90PWM3, AT90PWM3B, AT90CAN32, AT90CAN64, AT90CAN128
Supported environments
- Bascom AVR
- AVRDude
- WinAVR
- other
Useful links |
