- EOL
|
Attention! The product has been discontinued. Check other products in category. |
Description
The module is a combination of 3-axis digital gyroscope and compass. It allows you to measure acceleration and magnetic fields in the configurable ranges:±2 / ±4 / ±8 / ±12 gauss for the magnetometer and±2 / ±4 / ±6 / ±8 / ±16 g for the accelerometer. It communicates via the I2C bus, it is powered with the voltage of 3.3 V or 5 V.
|
The product is compatible with Raspberry Sample code and detailed information can be found inthe user guide. |
Connection
The sensor works with any microcontroller that has I2C interface, includingArduino. It hasPimoroni connectorthat allows direct connection to Raspberry Pi or use Garden HAT shield.
Pins
The board has 5 pins for self-soldering of goldpin connectors - 2.54 mm pitch (included).
| Name |
Description |
|---|---|
| 3-6V | Supply voltage from 3 V to 6 V. |
| SDA |
Data line of I2C. |
| SCL |
Clock line of I2C . |
| INT |
Input of the interrupt. |
| GND |
The ground of the system. |
Specification
- Supply voltage: from 3.3 V to 5 V
- Communication interface: I2C (0x1D or 0x1E - selected with the soldering jumpers)
- Accelerometer:
- 3 axes: X, Y, Z
- Adjustable range: ± 2 g, ± 4 g, ± 6 g, ± 8 g, ± 16 g
- Resolution: 16 bits
- Magnetometer (compass)
- 3 axes: X, Y, Z
- Range: ± 2, ± 4, ± 8, ± 12 gauss
- Resolution: 16 bits
- Pins: goldpin connectors - 2.54 mm pitch - for self-assembly
- The reverse connection protection
- Compatible withRaspberry Pi, version 3+ / 3 / 2 / B+ / A+ / - Zero and Zero W
Useful links |
