- Reduced price
- Sale
- Reduced price
- Sale
- Reduced price
- Sale
- Reduced price
- Sale
List of products by brand PiMoroni
Pimoroni designs, manufactures and sells friendly products aimed at makers, teachers and crafters. The company was founded in 2012 by John Williamson and Paul Beech. The company's mission is to make electronics more accessible and attractive, as well as to spread knowledge and encourage creativity. Initially with only one laser cutter at the company's disposal, Pimoroni now employs dozens of people using state-of-the-art machines and robots.
Loading...
LiPo SHIM - power supply extension for Raspberry Pi
LiPo PWM is an extension for Raspberry Pi mounted directly on the GPIO connector of the minicomputer. The device has JST 2.0 mm 2-pin connectors for connecting the...
Index: PIM-10634
Index: PIM-10634
Enviro pHAT - temperature, pressure, light intensity and proximity sensor - overlay for Raspberry Pi
Enviro pHAT is an overlay for Raspberry Pi with BME280 and LTR-559 sensors allowing to measure temperature, pressure, light level and proximity sensor. Additionally, the...
Index: PIM-16966
Index: PIM-16966
Automation Hat 3x relay + LED - Raspberry Pi extension
The module is working with a Raspberry Pi, it is mounted on the GPIO connectors, designed for home automation. It has 3 relays of 24 V / 2 A, 15 LED indicators, analogue...
Index: PIM-10636
Index: PIM-10636
Female goldpin strip 2x20 raster 2,54mm for Raspberry Pi - without soldering
40-pin goldpin connector strip which doesn't require soldering thanks to the clamps. It is used in Raspberry Pi 3 / 2 /B+ / Zero / Zero V. Raster of 2.54 mm.
Index: PIM-10622
Index: PIM-10622
Pirate Audio Speaker -speaker with display - DAC for Raspberry Pi - Pimoroni PIM485
DAC amplifier cap for Raspberry Pi minicompouter. It has a built-in 1 W / 8 Ω speaker and a 1.3" colour IPS display. Additionally, the board is equipped with 4...
Index: PIM-15897
Index: PIM-15897
Pirate Audio 3W Stereo Amp - 3W amplifier with display - AMP for Raspberry Pi - Pimoroni PIM484
Overlay with two DAC chips for the Raspberry Pi minicomputer. The board is equipped with a 3 W stereo audio output , two speaker terminals and a 1.3 " colour IPS display ....
Index: PIM-15898
Index: PIM-15898
Connector Set - goldpin 2x20 male, female and mounting device - without soldering
Set of 40-pin goldpin connector strips which don't require soldering thanks to the clamps. They are used in Raspberry Pi 3 / 2 /B+ / Zero / Zero V. Raster of 2.54 mm. The set...
Index: PIM-10624
Index: PIM-10624
OnOff SHIM - on / off switch - overlay for Raspberry Pi
OnOff SHIM is a shield for the Raspberry Pi, mounted on the GPIO connectors. After disconnecting the power supply to the micro USB port on the shield, you can turn on and off...
Index: PIM-10633
Index: PIM-10633
Male goldpin strip 2x20 raster 2,54mm for Raspberry Pi - without soldering
40-pin goldpin connector strip which doesn't require soldering thanks to the clamps. It is used in Raspberry Pi 4B/3B+/3B/Zero. Raster of 2.54 mm.
Index: PIM-10623
Index: PIM-10623
PiMoroni IS31FL3731 - Matrix LED RGB 5x5 I2C
A module with a matrix of 5 x 5 LED RGB, based on the system IS31FL3731. Communicates via an I2C bus, allowing for work with Raspberry Pi and Arduino. Powered by voltage of 3.3...
Index: PIM-13857
Index: PIM-13857
Pico Decker - quad IO expander for Raspberry Pi Pico
An overlay to expand the pin count of the Raspberry Pi Pico . There are 4 additional slots on the board with Pico leads and 1 slot designed for mounting Raspberry Pi Pico....
Index: PIM-18871
Index: PIM-18871
Pico RGB Keypad - backlit keyboard for Raspberry Pi Pico - PiMoroni
A keyboard for Raspberry Pi Pico equipped with 16 addressable LEDs to create a unique lighting effect . Each button can be individually programmed to light up in a...
Index: PIM-18874
Index: PIM-18874
Pico Scroll Pack - LED matrix 17x7
An extension dedicated to the Raspberry Pi Pico. The 17 x 7 rectangular array has a total of 119 individually controlled white LEDs . Additionally, the module is equipped...
Index: PIM-18878
Index: PIM-18878
Pico Proto - proto board for Raspberry Pi Pico
A prototyping board that allows you to solder in a Raspberry Pi Pico module and create projects based on it. The overlay has 6 x 20 holes with a 2.54mm grid into which you...
Index: PIM-18873
Index: PIM-18873
Pico Unicorn Pack - 16x7 RGB LED matrix for Rapberry Pi Pico - PiMoroni
The Pico Unicorn Pack is a 16x7 glossy matrix . It has a total of 112 RGB LEDs and 4 utility buttons , which are used to switch between modes, adjust brightness , and...
Index: PIM-18876
Index: PIM-18876
Pimoroni - Audio Dac Shim - audio line-out I2S
Audio Dac Shim overlay designed for Raspberry Pi. Based on PCM5100A DAC chip, which takes high quality digital audio from Raspberry Pi and outputs clear 24-bit / 192 kHz...
Index: PIM-18912
Index: PIM-18912
Picade X HAT USB-C - games console for Raspberry Pi - Pimoroni PIM462
Overlay for Raspberry Pi created by Pimoroni. It allows you to create your own game console based on the popular minicomputer which is Raspberry Pi. It has been equipped...
Index: PIM-18909
Index: PIM-18909
Unicorn HAT Mini - LED RGB matrix - for Raspberry Pi - Pimoroni PIM498
Overlay for Raspberry Pi made by Pimoroni company. On the board there are 119 RGB LEDs in the form of 17 x 7 matrix . Thanks to the HT16D35A chip it is possible to...
Index: PIM-19068
Index: PIM-19068
Automation HAT Mini - HAT for Raspberry Pi - Pimoroni PIM487
Automation HAT Mini is an overlay designed for Raspberry Pi minicomputers. The small size of the overlay gives great possibilities in automation . It is equipped with 24 V / 2...
Index: PIM-19070
Index: PIM-19070
Pimoroni Tiny 2040 8MB - development board - PiMoroni PIM558
A small development board with RP2040 microcontroller and 8MB of QSPI (XiP) flash memory . It features a USB Type C connector that can be used for power, programming and data...
Index: PIM-19278
Index: PIM-19278
Pimoroni Pico VGA Demo Base - audio/video expansion for Raspberry Pi Pico - Pimoroni PIM553
Module with VGA video and audio output designed for Raspberry Pi Pico . The board features a PCM5100A DAC audio chip with line output via I2S, PWM audio output, 15-pin VGA...
Index: PIM-19763
Index: PIM-19763
LiPo SHIM power hat for Raspberry Pi Pico - PiMoroni PIM557
SHIM LiPo power cap dedicated to Raspberry Pi version Pico. Manufactured by PiMoroni, it allows you to charge your Raspberry Pi Pico with a Li-Ion or Li-Pol battery . The...
Index: PIM-19765
Index: PIM-19765
HyperPixel 2.1 Round - Hi-Res Display for Raspberry Pi
Clear 2.1'' capacitive IPS touchscreen with a resolution equal to 480 x 480 px . It works with Raspberry Pi, supports Raspberry Pi OS and Python. The viewing angle is 175° ....
Index: PIM-20144
Index: PIM-20144
Pimoroni Pico LiPo 4MB - board with RP2040 microcontroller - Pimoroni PIM578
The Pico Lipo is a board manufactured by Pimoroni, featuring the top-of-the-line Raspberry Pi RP2040 microcontroller. The Pico LiPo offers a large amount of flash memory (4 MB),...
Index: PIM-20145
Index: PIM-20145
Pimoroni - history in a nutshell
Pimoroni's first product was the Pibow, an extremely practical case for the Raspberry PI. The case was sold in different colors and proved to be a huge hit. The company then created an arcade computer game called Picade. The next step was to sell Flotilla, a set of very practical modules in different colors that can be plugged directly into the computer. The product is aimed at families and children because it features easy and intuitive plug-and-play operation.
Wide selection of modules
In Botland store you will find, among others, Pimoroni modules with built-in gyroscope, compass and proximity sensor. Moreover, we offer units with multiplexer with protection against incorrect connection and modules with several displays and thermocouple amplifiers. Moreover, overlays for Raspberry Pi are also available, equipped with display and touch buttons, communicating directly via 12C interface. Our modules are compatible with most versions of the popular Raspberry.
Multicolored cases and accessories
The Botland catalog also includes extremely practical cases designed for the Raspberry Pi minicomputer. We offer models in different colors, including transparent ones, which will allow you to control e.g. the status of connected accessories. Moreover, you will find readable displays, matte overlays designed to blur the light coming from LED diodes and solid display housings, protecting matrices e.g. from mechanical damage. In Botland we also offer complete sets for creating your own radio, signed with Pimoroni logo and many other useful accessories.