- On sale!
- Promotion
List of products by brand PiMoroni - Strona 7
Loading...
HyperPixel - capacitive touch screen TFT LCD display of 3.5
HyperPixel touch screen, 3.5" capacity for Raspberry Pi with 800 x 400 px resolution. Works with Raspberry Pi in 3, 2, B+, A+, Zero and Zero W versions.
Index: PIM-10637
Index: PIM-10637
- EOL
pHAT Beat - sound card + LED for Raspberry Pi 3B+/3B/2B/1B+/Zero
Shield type Hat for Raspberry, version 3 B+, 3 B, 2 B, A+ B+ Zero with dual I2S DAC/ stereo amplifier MAX98357A, clamp connectors, 6 buttons to control and 16 LEDs.
Index: PIM-11464
Index: PIM-11464
- EOL
LED driver SN3218 18-channel, 8-bit - I2C
The device allows for the control of 18 LEDs supplied with voltages from 2.75 V to 5.5 V, each consuming up to 34 mA. It communicates via the I2C bus and cooperates with...
Index: RPI-04584
Index: RPI-04584
- EOL
pHAT Stack – Raspberry Pi pins expander - solder yourself kit- Pimoroni PIM321
The pHAT Stack board connects to the Raspberry Pi via a 40-pin cable and increases the minicomputer's pin count by an additional five 40-pin goldpin strips . You can connect 5...
Index: PIM-18913
Index: PIM-18913
- EOL
Pico Wireless Pack - PiMoroni PIM548
An overlay produced by PiMoroni dedicated to Raspberry Pi version Pico. Pico Wireless Pack allows connection to 2.4GHz wireless networks . It also allows data transfer....
Index: PIM-19584
Index: PIM-19584
- EOL
Additional speaker for Pimoroni Pirate Radio
An additional speaker for the Pimoroni Pirate Radio - Pi Zero W Project Kit, which allows you to build your own radio based on the Raspberry Pi Zero. The speaker has a diameter...
Index: PIM-20455
Index: PIM-20455
- EOL
W5100S EVB Pico - board with RP2040 microcontroller - Pimoroni W5100S-EVB-Pico
Development board based on Raspberry RP2040 microcontroller with built-in W5100S TCP/IP controller. It supports wired internet protocols: TCP, UDP, WOL over UDP, ICMP,...
Index: PIM-20648
Index: PIM-20648
- EOL
32blit Dev Kit - retrogame console - PiMoroni PIM535
The 32blit console from PiMoroni allows you to play retro games. It is based on STM32H750VB microcontroller with Cortex M7 core clocked at 480 MHz and 1 MB SRAM. Additionally,...
Index: PIM-20888
Index: PIM-20888
- EOL
Speaker pHAT - speaker and amplifier extension for Raspberry Pi
PHAT Speaker is a shield for the Raspberry Pi mounted directly on the GPIO connectors of minicomputer. The module has an I2S DAC and monophonic amplifier 3 W and 10-bar...
Index: PIM-10631
Index: PIM-10631
- EOL
Picade HAT - retro game console - Raspberry Pi extension
Picade is an overlay for the Raspberry Pi that is mounted directly on the GPIO minicomputer's GPIO leads. With this cap you can create a retro game console using the Raspberry....
Index: PIM-10628
Index: PIM-10628
- EOL
Automation pHAT 1x relay + LED - Raspberry Pi extension
The module working with a Raspberry Pi, mounted on the GPIO connectors, designed for home automation. It has 1 relay of 24 V / 2 A, analog channels and screw connectors.
Index: PIM-10635
Index: PIM-10635
- EOL
Picade set - retro console - overlay + accessories for Raspberry Pi 3B+/3B/2B/1B+/Zero
A retro console kit based on the Picade overlay for Raspberry Pi. On the board there are connectors for the joystick and buttons, audio I2S DAC with 3 W amplifier and a power...
Index: PIM-11469
Index: PIM-11469
- EOL