- EOL
|
Attention! The product has been discontinued. Check others products incategory. |
Product description: Pi-DAC PRO - sound card for Raspberry Pi 4B/3B+/3/2/B+/A+
Sound DAC overlay forRaspberry Pi 4B / 3B+ / 3 / 2 / B+ / A+equipped withBurr Brown PCM5242 DAC chipwith 32-bit resolution, operating at 384kHz. The board has a balanced output with the ability to solder XLR connectors, high signal-to-noise ratio114 dB (SNR)and harmonic distortion at-94 dB (THD). Volume control is performed by the ALSA system. There are 2 RCA connectors and 3.5 mm jack socket on the board.
The overlay allows you to connect more Hat's to it.
The card is equipped with ESD protection.
Main features of Pi-DAC PRO - sound card for Raspberry Pi 4B/3B+/3/2/B+/A+
- Built-in 2 RCA sockets.
- Built-inTI TPA6133Aheadphone amplifier.
- Burr Brown TI PCM5242DACwith 32-bit resolution and 384 kHz operating speed.
- It has a built-in sound level controller, which can be controlled through mixer programs, e.g. ALSA mixer.
- Sound in Full HD up to 24-bit at 192 kHz.
- Protection against electrostatic discharge.
- Balanced PCB outputs for soldering XLR connectors.
- Pre-programmed EEPROM memory for automatic device configuration.
- Full access to GPIO pins on board.
- Power supply from Raspberry Pi pins.
Pi-DAC PROspecification- sound card for Raspberry Pi 4B/3B+/3/2/B+/A+
- Burr Brown TI PCM5242 DAC -32-bit / 384kHz
- Built-in headphone amplifier: TI TPA6133A
- Signal-to-noise ratio: 114 dB
- Harmonic distortion: -94 dB
- I2S digital interface
- Connectors:
- 2 x RCA
- 1 x 3.5 mm jack
- BAL OUT
- Software volume control via ALSA
Useful links |
