Product description: Enviro Grow with Raspberry Pi Pico W - plant irrigation system + accessories - Pimoroni PIM637
A wireless plant irrigation monitoring system that will help you take care of your plants. Enviro Grow is equipped with sensors : BME280 and LTR-559 , which allow you to measure temperature, humidity, pressure, light level and distance to objects in the immediate vicinity. The kit is controlled by the Raspberry Pi Pico module with the RP2040 microcontroller . The system has a built-in sound signal that will attract your attention and remind you to water the plants. However, if you want to make the care of plants even easier, Enviro Grow allows you to connect a pump and create an automatic irrigation system .
Enviro Grow with Raspberry Pi Pico W + accessories.
Technical specification of Enviro Grow
- Raspberry Pi Pico W
- Dual Arm Cortex M0 + operating at up to 133 MHz with 264 KB of SRAM
- 2MB QSPI flash memory supporting XiP
- Powered and programmable via USB micro-B
- 2.4 GHz wireless communication
- Controlling the set with the RP2040 microcontroller
- Deep sleep / wake function with RTC
- Reset button
- Warning LED
- Qw / ST connector available to expand the automatic irrigation system and add more I2C sensors
- No soldering required
- Dimensions: 69 x 36 x 10 mm
Technical specification of the BME280 sensor
- Temperature measurement range: -40 ° C to 85 ° C
- Humidity measurement range: 0% to 100%
- Pressure measurement range: from 300 hPa to 1100 hPa
Technical specification of the LTR-559 sensor
- Light intensity measurement range: from 0.01 lux to 64K lux
- Object detection range: up to 5 cm
Included
- Enviro Grow module with Raspberry Pi Pico W
- Soil moisture sensors: 3 pcs.
- Sensor cables: 3 pcs. (35 cm)
- Mini pumps: 3 pcs.
- 1 m silicone tube
- AA batteries: 3 pcs.
- MicroUSB cable
- Velcro for attaching the battery