- EOL
|
Attention! The product has been discontinued. Check other products in category. |
Product description: STM32 NUCLEO-H745ZI-Q - STM32H745ZIT6 ARM Cortex M7
Module based on 32-bitSTM32microcontroller equipped withARM Cortex M7 480MHzcore andARM Cortex M4 240 MHzcore.It has2 MB flashmemory, 864 kB SRAM. Nucleo is compatible withmbedplatform and has connectors forArduino coversand Ethernet socket. Nucleo is compatible with most popular development platforms including Keil, IAR and GCC based environments.
STM32 Nucleo H745ZI-Q.
Module compatible with mbed system.
STM32 module specification
- Microcontroller: STM32H745ZIT6
- The core: ARM Cortex M7 32-bit / ARM Cortex M4
- Clock frequency: 480 MHz / 240 MHz
- Flash memory: 2 MB
- SRAM: 864 kB
- Memory RAM: 1 MB
- Analogue-to-Digital Converter (ADC): 16-bit, 36-channel
- Number of 16-bit timers: 17
- Number of Timers 32-bit: 2
- Interfaces: 4x I2C, 6x SPI, 3x I2S, 2x CAN, 4x USART, 4x UART, USB OTG FS
- Two types of connectors:
- Connectors forArduino Uno Rev3 compatible caps
- Standard STMicroelectronics Morpho pins, allowing access to the microcontroller outputs
- Module compatible with mbed(mbed.org) system
- ST-Link/V2 Debugger placed on the board with the possibility of working as a separate device with SWD output
- Power supply:
- Via USB
- External source: 3.3 V and 7 to 12 V through ST Zio or ST morpho connectors
- 5 V through ST morpho connector
- Three LEDs are built in:
- 1 x indicating the supply voltage
- 1 x signalling communication
- 1 x at your disposal
- Two buttons:
- 1 x RESET
- 1 x at your disposal
- Support for IEEE-802.3-2002Ethernetinterface
- Quartz resonator: 32,768 MHz
- Three different interfaces viamicroUSB(USB re-enumeration):
- Virtual COM port
- Storage
- Programming/debugging port
- The module is supported by most popular environments, such as IAR, Keil and platforms based on GCC compiler
