- EOL
|
Attention! The sale of the product has been completed. Check otherdevices in this category. |
Description
The tilt sensor detects changes of position in four directions: forward-reverse and left-right. The module behaves like a simple accelerometer. The outputs are two digital signals.The advantage isalso the ability to work with voltages of 3.3 V and 5 V. The module dimensions are 11 x 11 mm.
The film made by SparkFun company presenting the possibilities of the product.
Connection
The sensor has four leads:
- VCC- 3.3 V or 5 V supply
- GND- system weight
- S1, S2- digital output signals
When the power supply is connected and the output signals are connected, the following logical states will appear on the outputs depending on the tilt: LOW/lOW, LOW/HIGH, HIGH/lOW and HIGH/HIGH.
|
Arduino compatible product An example of connection withArduinolibrary can be found onbildr.org. |
The leads are holes forgoldpin connectors (2.54 mmraster), which allow to connect the sensor with wiresordirect connection to the contact board.
|
The kit does not includegoldpin strips...can be purchased separately. |
Useful links |
