- EOL
Attention! The product has been discontinued. Check other products in category. |
Product description: SparkFun Pro Micro - RP2040 - SparkFun DEV-18288
A small board from SparkFun based on Raspberry Pi RP2040 microcontroller with ARM Cortex M0+ Dual-Core clocked at 133 MHz. It features 264 kB of SRAM, 6 dedicated IO pins for SPI Flash memory, 30 GPIO pins, USB Host / Device port via USB Type-C. The manufacturer has also included a Qwiic port, Reset and Boot button and an addressable RGB LED on the board.
The RP2040 microcontroller can be programmed in both C/C++ and MicroPython. It has UF2 booting and floating point routines built in. Although the board is equipped with a lot of RAM, there is an additional chip with 16 MB QSPI Flash memory for program code storage. The board is also equipped with a Qwiic connector, which allows easy connection of modules and sensors equipped with the same connector, with an I2C interface.
Manufacturer prepared user guide for SparkFun Pro Micro module.
SparkFun Pro Micro module specification
- Raspberry Pi RP2040 chip
- 3.3V AP2112 voltage regulator
- Supports C/C++ and MicroPython programming
- Built-in USB C port for power supply and programming
- Built-in PTC fuse
- 20 multi-functional GPIO pins:
- 4x 12-bit ADC with built-in temperature sensor, 0.5 MSa/s
- 10x PWM channels
- 2x UART
- 1x I2C (Qwiic)
- 1x SPI
- Reset and Boot button
- WS2812 power and RGB LED
- 16 MB external Flash memory
- Dimensions: 33 x 18 mm
RP2040 chip specifications
- Dual-core ARM Cortex M0+ with 133 MHz clock speed
- 264 kB of on-chip SRAM
- 6 dedicated IO for QSPI Flash
- 30 programmable IO
- SWD interface
- Timer with 4 alarms
- Real time clock (RTC)
- USB 1.1 Host / Device functionality
- Supported programming languages: C/C++ and MicroPython