- EOL
|
Attention! The product has been discontinued. Check other products in category. |
Description: Adafruit LCD display 2x16 characters RGB positive + connectors
Alphanumerical LCD display, based on the popular HD44780 controller. It can display 32 characters in two rows and sixteen columns. This model is characterized by the possibility of highlighting in any color. The characters are black, so called positive. The device works with voltages of 3.3 V and 5 V.
Connection
The system has 18 outputs, of which the first 16 are compatible with standard display 2x16 characters. Pins 17 and 18 are responsible for additional illumination colors, green and blue.
The distribution of outputs is presented in the table below:
| 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 |
| VSS | VDD | V0 | RS | RW | E | DB0 | DB1 | DB2 |
| 10 | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 |
| DB3 | DB4 | DB5 | DB6 | DB7 | LED+ | - R | - G | - B |
|
The product is compatible with Arduino and Raspberry Pi In the system Adafruit you can find an example of connectingArduinoandRaspberry Pi. |
Specification of Adafruit LCD display RGB
- Works with voltages 3.3 V and + 5V
- Number of characters: 2 rows, 16 columns
- Backlight: any color from the palette RGB (red, green, blue)
- Characters color: black
- Driver compatible with HD44780
- Built in resistors for lighting
- Connectors: hole to goldpin connectors - 2.54 mm raster (included in the kit for self soldering)
- The ability to adjust the brightness of the backlight by using PWM signal
- The device requires a potentiometer to adjust the contrast, for example, 10 kω (included)
- Module dimensions: 71 x 27 mm
Included:
- LCD display 2x16 characters backlit RGB positive
- Goldpin strap 40 contacts, pitch 2.54 mm
- Potentiometer for contrast adjustment 10 kOhm
Useful links |
