- EOL
|
Attention! The product has been discontinued. Check other products in category. |
Description
The extending module in the form of shield for Cubieboard minicomputer in version 1 or 2. It has the ability to connect, i.a. touch LCD displays, camera module, UART and SPI devices, Arduino Shield, modules of ZigBee and many others.
The subject of the sale is a shield, minicomputer Cubieboard not included.
The distribution of elements on the board
- Connector for connnecting Cubieboard 1/2 to minicomputer
- Pins from minicomputer Cubieboard 1/2
- Interface TVOUT- video CVBS output for connection the TV screen
- VGA interface - VGA output for monitor connection
- A capacitive, touch screen interface of 7" LCD RGB - to connect the monitor with RGB interface
- A capacitive, touch screen interface of 7" LCD LVDS - for connection of the monitor with LVDS interface
- Interface of touch resistive screen of 7" LCD RGB - for connection of the monitor with LVDS interface
- The camera interface - for connecting a camera module, for example, OV7670
- ZigBee connector - for connecting ZigBee modules, for example, Core2530
- UART interface - for connecting the modules RS232, RS245, etc.
- The 1-Wire interface - for connecting devices 1-Wire, for example,temperature sensor DS18B20
- Interface SPI / I2C - to connect modules with SPI or I2C interface
- Connector Arduino - to connect the modules compatible with Arduino or Arduino shields
- The UART interface - is based on a system PL2303TA to debug
- USB interface - converter USB-UART based on the module PL2303TA
- The ICSP interface - the ICSP Arduino interface
- Power input/output of 3.3 V / 5 V - is used as output of power or as the total mass with other modules
- Crystal 12 MHz - for system PL2303TA
- Built-in PL2303TA chip - converter USB-UART
- Battery powering the RTC - 3.3 V
- 32.768 KHz crystal - for system PCF8563
- System PCF8563 - RTC
- Buzzer
- AD Button - 3 buttons in combined with the Arduino
- 8 LEDs at user's disposal
- The LED indicating the power
- Jumper TVOUT
- Selection jumper of power for the camera
- Jumper of RTC
- Selection jumper of power for RTC
- Jumpers 1-Wire of buzzer and buttons AD
- Jumper to select the port of the Arduino
- Jumpers for user's LEDs
- Selection jumper of Arduino:
- right side - for analog-digital shields
- left side - is for I2C shields
- Selection jumper of UART Arduino:
- right side - is for UART shields
- left side - is to connect the Arduino microcontroller's board
|
A detailed description of the connection and use of overlay can be found in the manufacturer's user manual. |
Set includes:
- Module DVK522 - extension board
- Cable USB - miniUSB
- Mounting screws
The module does not containbattery CR1220. It must be purchased separately.
Useful links |
